BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum

Go Back   BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum > General Mini Buggy and Go Kart Forums > Go Kart General Discussion

Go Kart General Discussion Forum for general go kart discussion.

 
 
Thread Tools
  #1  
Old 03-30-2010, 01:01 AM
DestructionDan DestructionDan is offline
Lurker
 

Join Date: Mar 2010
Posts: 9
Default Got the kids a kart last week

Picked it up for 250 not bad not great just got sick of beepties on craigslist wanting too much and or junk.

Got me a HF clone and poped it on.
Seen BMs tube vid on the throttle and stopped by.
Freakin 5/16-24 bolt is a pain to find around here, for the clutch.
May change the chain as it looks pretty old and beat up.

Talked to a local racer and got the hookup on used tires cheap.
He said it should go around 40-50 with gov. in the moto.
May end up being a daddy toy if she goes that fast.

If I find the bolt and the free clutch works i'll try to get some vid.



  #2  
Old 03-30-2010, 07:46 AM
KID4LIFE's Avatar
KID4LIFE KID4LIFE is offline
Contributor
 

Join Date: Feb 2010
Location: CANTON, OH
Posts: 258
Default

the kids will love it. they can deal with no suspension....me?, not so much, my bones are older.....
good luck with the new project and post pics when you can...
__________________
07 HH250SS
UNI
HIT CLUTCH
DR. PULLEY VARIATOR
RED MAIN
17g ROLLERS
12T/45T SPROCKETS
IRIDIUM PLUG
HP CDI & COIL
LED LIGHTS

ASW CARBIDE
UNI
12g SLIDERS
RED MAIN
39T SPROCKET (coming soon)
  #3  
Old 03-30-2010, 10:43 AM
BuggyMaster's Avatar
BuggyMaster BuggyMaster is offline
Administrator
 

Join Date: Jul 2009
Posts: 2,312
Default

Looks like it will be fun! Enjoy and be sure to post progress updates!
  #4  
Old 03-30-2010, 03:17 PM
joshstep1's Avatar
joshstep1 joshstep1 is offline
Senior Member
 

Join Date: Oct 2009
Location: Clarksville TN
Posts: 1,141
Default

Nice
__________________
-Josh
My Ride:
ASW Carbide

Mods:
Dr. Pulley Hit Clutch
FMF Slip-On Exhaust
No Rev. CDI
Uni Air Filter
130 Main jet
1500 RPM main clutch spring
11g sliders
75w Halogen Headlights

CARBIDE!
  #5  
Old 03-30-2010, 07:30 PM
DestructionDan DestructionDan is offline
Lurker
 

Join Date: Mar 2010
Posts: 9
Default

Well got everything on and for some reason I don't think that I am really getting 3600 rpm out of it.
The gov pulls the carb arm back way too soon. Not even enough rpm to really make the tires spin with a load. It surges revs up and down. I think the gov may need to come off.

If I do take it out can I just bypass it from the top or do I need to take the gear out >?<



Last edited by DestructionDan; 03-30-2010 at 08:11 PM.
  #6  
Old 03-30-2010, 09:13 PM
Carp Carp is offline
Contributor
 

Join Date: Mar 2010
Location: Pittsburgh, Pa
Posts: 113
Default

Take the gear out. You don't want that thing coming loose and bouncing around in there. I took one out of my Subaru 9.0 HP......it was easy.
__________________
Bigger + Louder = Better
  #7  
Old 04-01-2010, 09:33 PM
DestructionDan DestructionDan is offline
Lurker
 

Join Date: Mar 2010
Posts: 9
Default

It issedp me off so bad I pulled the gov.
That was the problem i'm sure of it.
It had so much play in the fins flaps thingies it was unreal.
The wobbled around in there bad.

Going to get the new valve springs friday (I hope) And put this bad mother back on.
Then we find out if the clutch is bad or if it was just the rpms.

Anyone know of a kart shop close to the south side of charlotte NC
  #8  
Old 04-01-2010, 09:37 PM
BuggyMaster's Avatar
BuggyMaster BuggyMaster is offline
Administrator
 

Join Date: Jul 2009
Posts: 2,312
Default

Piedmont kart is up in Conover near Hickory and stocks majority of stuff. If you order from them on line you'd likely have it in a day. Not too aweful a drive from Charlotte though.
  #9  
Old 04-01-2010, 09:47 PM
DestructionDan DestructionDan is offline
Lurker
 

Join Date: Mar 2010
Posts: 9
Default

Thats a bit far.
Found them in Concord but thats still a hr drive.
May just have to order them.
The wife and kids will be out of the state for a week so I really wanted to get this going and make sure the kids will be somewhat safe. Well fine I wanted to play..

Gota say this clone is ugly inside. Lots of non shiny parts.
  #10  
Old 04-02-2010, 09:15 AM
mancofunkart's Avatar
mancofunkart mancofunkart is offline
Lite Contributor
 

Join Date: Jul 2009
Location: west chester,pennsylvania
Posts: 31
Default

is the motor a greyhound?
  #11  
Old 04-02-2010, 11:42 AM
DestructionDan DestructionDan is offline
Lurker
 

Join Date: Mar 2010
Posts: 9
Default

Yes it is man
  #12  
Old 04-02-2010, 08:51 PM
mancofunkart's Avatar
mancofunkart mancofunkart is offline
Lite Contributor
 

Join Date: Jul 2009
Location: west chester,pennsylvania
Posts: 31
Default

yo those motors are diehard i had one on my manco amex and never changed the oil in the two years i had it and still ran like a champ. i started it with two pulls in 15°f weather.
  #13  
Old 04-03-2010, 05:47 PM
DestructionDan DestructionDan is offline
Lurker
 

Join Date: Mar 2010
Posts: 9
Default

Took it for a test drive today with stock springs (HAD TO OK)
WOW this thing flies, No GPS yet but I would say 40-45
Church parking lot full speed left turn could not get it to roll (SO had to try)
Just a little tire slip but WOW just WOW. Brother said I have to get the seat because he will live in this thing, Or so he thinks.

Must change the wide right front tire to a smaller tire because of the jerking around.
Going to put 2 wide in back and 2 smaller in front That should help with the jerking round.

When the wife gets back i'll have her take a short vid of it going. Will be a crappy cell phone vid but it'll work.
Thinking about a riding lawn mower seat so my kids big butts can fit in it.
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:51 PM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.