#1
|
||||
|
||||
Mike from Gardner
Hey everyone!
Here's my story. I recently bought an 09' SunL 150cc gokart off craigslist (SLGK-160A). The seller said it wouldn't start because of a bad coil, which was conveniently removed from the kart, and a broken chain. Thinking it was an easy fix, I bought the cart off him, and ordered a coil and fixed the thing up. I started it up, kicked it in gear and revved it, and heard a terriable noise coming from the back. Then I found out that was not the problem afterall, the seller had lied to me because the transmission had gears with missing teeth. I'm bitter about it, but if I can get it fixed, I'll get over my bitterness. You live and learn right... now I know something else to check next time I buy a kart. Anyway I've been trying to locate these parts and have had very little luck, then I stumbled across this forum and it seems like a great place for me to do some research. (I'll post the questions in a different place though since this is the new member section). Thats my story. Here are some pictures of the broken teeth on the gears. |
#2
|
||||
|
||||
Hey Mike first where are you located. Also from what I see that looks similar to a roketa tranny used in one of their older models. If you can send more pics of the overall tranny, maybe I could verify it so as to get the parts needed. TOM
|
#3
|
||||
|
||||
post pics and location
always helps parts are available are you shure its a 2009
__________________
olderthan 2008 tomberline punisher 1500 spring 12g sliders 30mm cv pumper carb uni filter no rev cdi polaris xlt snowmobile shocks for front w/550 magnum springs & blaster fronts on rear and another buggy built working on mods gk-13 white spring 17 gram sliders so far |
#4
|
||||
|
||||
forgot to say
welcome to the group
__________________
olderthan 2008 tomberline punisher 1500 spring 12g sliders 30mm cv pumper carb uni filter no rev cdi polaris xlt snowmobile shocks for front w/550 magnum springs & blaster fronts on rear and another buggy built working on mods gk-13 white spring 17 gram sliders so far |
#5
|
||||
|
||||
the "Certification of Compliance" says it's "Date of product manufacture" is "2009.3".
I'm in Gardner, KS. Sorry... forgot to list state on the title |
#6
|
||||
|
||||
i was thru there last month
__________________
olderthan 2008 tomberline punisher 1500 spring 12g sliders 30mm cv pumper carb uni filter no rev cdi polaris xlt snowmobile shocks for front w/550 magnum springs & blaster fronts on rear and another buggy built working on mods gk-13 white spring 17 gram sliders so far |
|
|