#1
|
||||
|
||||
Exhaust
I kinda want to buy an FMF slip on exhaust for my buggy, the one that runs. THe one I found is only $120. How's that work? What's a "slip on?" Does it make a difference in performance?
__________________
-JoshMy Ride: ASW Carbide Mods: Dr. Pulley Hit Clutch FMF Slip-On Exhaust No Rev. CDI Uni Air Filter 130 Main jet 1500 RPM main clutch spring 11g sliders 75w Halogen Headlights CARBIDE! |
#2
|
||||
|
||||
Pretty sure it means you've gotta come up with the pipe from the manlfold and slip the FMF on.
|
#3
|
||||
|
||||
You cut off your old muffler right where the header meets the muffler. Then, slip on the FMF and clamp it down. There are two different universal slip ons. One is 1 and 1/8th and the other is 1 and 1/4. Get the bigger of the two.
|
#4
|
||||
|
||||
So you don't have to re weld anything?
__________________
-JoshMy Ride: ASW Carbide Mods: Dr. Pulley Hit Clutch FMF Slip-On Exhaust No Rev. CDI Uni Air Filter 130 Main jet 1500 RPM main clutch spring 11g sliders 75w Halogen Headlights CARBIDE! |
#5
|
||||
|
||||
cut your exhaust directly at the muffler
when you mount the slip-on it should come with a band-type clamp to hold the muffler in place
__________________
olderthan 2008 tomberline punisher 1500 spring 12g sliders 30mm cv pumper carb uni filter no rev cdi polaris xlt snowmobile shocks for front w/550 magnum springs & blaster fronts on rear and another buggy built working on mods gk-13 white spring 17 gram sliders so far |
#6
|
||||
|
||||
Aweosmeness. Thanks guys.
__________________
-JoshMy Ride: ASW Carbide Mods: Dr. Pulley Hit Clutch FMF Slip-On Exhaust No Rev. CDI Uni Air Filter 130 Main jet 1500 RPM main clutch spring 11g sliders 75w Halogen Headlights CARBIDE! |
#7
|
||||
|
||||
One more question about these, do they make a performance difference and what about sound?
__________________
-JoshMy Ride: ASW Carbide Mods: Dr. Pulley Hit Clutch FMF Slip-On Exhaust No Rev. CDI Uni Air Filter 130 Main jet 1500 RPM main clutch spring 11g sliders 75w Halogen Headlights CARBIDE! |
#8
|
||||
|
||||
Yeah Josh it will help performance because you're totally unrestricting your air flow, it's like complementing the uni filter you already have in place. Now with that said all that unrestricted air flow is gonna be somewhat louder than your stock pipe yes.
|
#9
|
||||
|
||||
jakethesnake is right
will have more rumble due to better airflow if you gutted your exhaust in the past it was proubly more noise than the new one will have
__________________
olderthan 2008 tomberline punisher 1500 spring 12g sliders 30mm cv pumper carb uni filter no rev cdi polaris xlt snowmobile shocks for front w/550 magnum springs & blaster fronts on rear and another buggy built working on mods gk-13 white spring 17 gram sliders so far |
#10
|
||||
|
||||
As long as you get the bigger of the two (I think 1 and 1/4 inch) it should slip on. We got the 1 and 1/8th and it was the same size so we had to re-weld. We always liked that muffler.
|
#11
|
||||
|
||||
Be sure to rejet your carb as well.
__________________
09 Joyner Sand Viper 250 08 Joyner Sand Viper 250 2009 Joylaris 400 Screamer http://www.youtube.com/watch?v=eeulR4W1_PU |
|
|