BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum

Go Back   BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum > Technical Discussions > 250cc and Above Engine Tech

250cc and Above Engine Tech Technical Discussion Forum for 250cc and up Engines

 
 
Thread Tools
  #1  
Old 03-18-2015, 11:55 AM
Gummerfan's Avatar
Gummerfan Gummerfan is offline
Lite Contributor
 

Join Date: Jan 2015
Posts: 85
Default 300 xrx running great! But won't start...

Finally got my carb situation worked out! Thanks to Tom at Syc for the help! Now...
My buggy won't start! The ignition will turn on, but the starter motor won't turn over. I CAN however start it with jumper cables going to the starter. I haven't found any bad connections yet and I'm wondering if it might be the solenoid? It isn't clicking or anything. I did have to jump start a lot when I was having my carb problems. I checked the fuse and replaced it even though it looked okay. At this point I'm considering just wiring in a start button
Warm weather's here and I'd rather spend it riding than wrenching lol!
Any suggestions?

Last edited by Gummerfan; 03-18-2015 at 12:00 PM.
  #2  
Old 03-19-2015, 10:06 AM
SYCARMS's Avatar
SYCARMS SYCARMS is offline
Supporting Vendor
 

Join Date: Sep 2009
Location: Senatobia, Mississippi
Posts: 3,375
Default

Using a test light or volt meter check for power at the small wire usually y/g or y/r at the solenoid with ign. switch in the start position. If power is present, solenoid is the cause.
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:38 PM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.