BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum

Go Back   BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum > Off Topic and Other Forums > Off Topic

Off Topic Anything Goes!

Reply
 
Thread Tools
  #1  
Old 04-13-2014, 02:23 PM
TheFauxFox's Avatar
TheFauxFox TheFauxFox is offline
Heavy Contributor
 

Join Date: Oct 2013
Location: Auburn, AL
Posts: 749
Default Welder

The time has come! I have actually found a welder that I can afford, the question is will it be good enough? I'm not looking to weld together an entire frame from scratch, I'm just looking to a 2slicknick type job (like that murray kart). Welding parts onto the frame, seatbacks, etc etc. It's a 70amp arc welder. Do ya guys think it'd be fine? Looked it up and I see that it welds up to 1/8in thick, I know welding will take some time and practice (and a helmet! ) but it would fine, wouldn't it? I don't think any of the tubing on my YD is more than 1/8?

http://atlanta.craigslist.org/eat/tls/4414914246.html

Edit: According to metalstudman, the metal is about 16ga thick (.0598in) and the welder handles 11-12ga (.125in) so I'm good to go there. Got info from this thread
__________________
Yerf-Dog Spiderbox
Reverse Gearbox
Heavy Duty Ball Joints
Heavy Duty Chain Tensioner
Canvas Roof/Netting
Key Start
LED Brake Lights
Headlights

SOLD!

Last edited by TheFauxFox; 04-13-2014 at 02:38 PM.
Reply With Quote
  #2  
Old 04-13-2014, 04:12 PM
2SlickNick's Avatar
2SlickNick 2SlickNick is offline
Senior Member
 

Join Date: Mar 2013
Location: Gilbert, AZ.
Posts: 1,268
Default

I am not sure about that type of welder, but I imagine it would work for what you want to do with it. I am unsure of how pricey rods can be, but make sure you have a helmet and gloves. I bet it will weld metal. Practice makes perfect. Good luck. Maybe someone else will chime in here.. Time for work
__________________
Growing old is mandatory
Growing up is optional
https://www.youtube.com/watch?v=NEXoa-8d7qE
Reply With Quote
  #3  
Old 04-13-2014, 09:15 PM
Masteryota's Avatar
Masteryota Masteryota is offline
Senior Member
 

Join Date: Dec 2012
Location: North Florida
Posts: 1,155
Default

Arc/stick welders are notoriously hard to learn, and each metal alloy has a stick to correspond to it, wrong stick, weld fails. If you do choose to get an arc welder, once you get proficient with it, you can do damn near anything. For the most part though, the materials we are welding are too thin to easily weld with an arc welder.

My $.02, save and wait for a decent flux/mig set up. You won't regret it.
__________________
ASE Master and Toyota Master Diagnostic Certified
Buggy Building Trainee

'04 Dazon Raider 150 'modded'
Reply With Quote
  #4  
Old 04-13-2014, 09:55 PM
TheFauxFox's Avatar
TheFauxFox TheFauxFox is offline
Heavy Contributor
 

Join Date: Oct 2013
Location: Auburn, AL
Posts: 749
Default

Interesting. I wanted an arc anyway just because its the "go anywhere" kinda thing. I def. don't want one with a gas tank so either flux/arc, but I figured an arc would be a good hobbyist/starter welder. I know I'd be able to do a lot with it once I get the hang of it, people say its like striking a match. Is that somewhat true?

Again, thanks for the great info/responses!
__________________
Yerf-Dog Spiderbox
Reverse Gearbox
Heavy Duty Ball Joints
Heavy Duty Chain Tensioner
Canvas Roof/Netting
Key Start
LED Brake Lights
Headlights

SOLD!
Reply With Quote
  #5  
Old 04-13-2014, 10:11 PM
Masteryota's Avatar
Masteryota Masteryota is offline
Senior Member
 

Join Date: Dec 2012
Location: North Florida
Posts: 1,155
Default

Striking a match is likely referring to the motion used to weld with a stick. Please research methods for arc welding if you buy it, the seams need to be a certain way and the ends of the welds can't be on corners and things like that. That is what drives people to move to mig/wire, they are point and shoot.

Flux also takes some finesse to get down pat, mig is more forgiving and leaves a cleaner bead and can be used on really thing stuff without burning holes.
__________________
ASE Master and Toyota Master Diagnostic Certified
Buggy Building Trainee

'04 Dazon Raider 150 'modded'
Reply With Quote
  #6  
Old 04-14-2014, 03:02 AM
Miamieddie's Avatar
Miamieddie Miamieddie is offline
Heavy Contributor
 

Join Date: Jan 2012
Location: miami. florida
Posts: 610
Default

Once you learn how to arc weld you should be fine. Me and my son has been teaching ourselves how threw the internet and YouTube. I bought the arc welder from HF. Cause it was on special. Remember after all arc welding is how everything got welded in the past before might and tig came out. Just practice... there's different rods for different metals and amp settings. You'll be fine. Engoy!!!!!
__________________
2. 150cc carters. 1. Baja reaction 150cc dr2 variators Jerseydevil hp. Pipes unifilters gates belts. Yellow main springs hd. Orange coils.
Reply With Quote
  #7  
Old 04-14-2014, 03:07 AM
Miamieddie's Avatar
Miamieddie Miamieddie is offline
Heavy Contributor
 

Join Date: Jan 2012
Location: miami. florida
Posts: 610
Default

But again like master said mig would be the way to go if you haven't bought the arc welder yet.
__________________
2. 150cc carters. 1. Baja reaction 150cc dr2 variators Jerseydevil hp. Pipes unifilters gates belts. Yellow main springs hd. Orange coils.
Reply With Quote
  #8  
Old 04-14-2014, 10:02 AM
bear's Avatar
bear bear is offline
Senior Member
 

Join Date: Mar 2012
Location: cincy,ohio
Posts: 1,347
Default

The arc isnt that big a deal to us "old timers" cause thats all there was back then! That being said, if they had mig/tigs back then, I'd taken my stick welder straight to the dump! what with all the different rods and making sure they didnt get the least bit damp and all that! just an "old farts" opinion!
Reply With Quote
  #9  
Old 04-14-2014, 03:43 PM
TheFauxFox's Avatar
TheFauxFox TheFauxFox is offline
Heavy Contributor
 

Join Date: Oct 2013
Location: Auburn, AL
Posts: 749
Default

Haven't bought it...but still think that I may. Essentially the downfalls of it are that a) sticks can't get wet b) difficult to start c) certain sticks per metal.

So are there different sticks for different types of steel...not stainless or alum. just steel. I know there are different thicknesses, but what about types of metal?
__________________
Yerf-Dog Spiderbox
Reverse Gearbox
Heavy Duty Ball Joints
Heavy Duty Chain Tensioner
Canvas Roof/Netting
Key Start
LED Brake Lights
Headlights

SOLD!
Reply With Quote
  #10  
Old 04-14-2014, 06:28 PM
zman007007's Avatar
zman007007 zman007007 is offline
Senior Member
 

Join Date: Dec 2012
Location: Gray Court,S.C.
Posts: 1,476
Default

you have regular steel ,stainless and more hard to weld is the old cast iron. it is also very hard to get used to looking through a welding shield because of the darkness of the lens. you don"t want to burn your eyes welding. I have done it twice and believe me it is no walk in the park. and yes mig is a hell of a lot easier than stick.
Reply With Quote
  #11  
Old 04-14-2014, 08:20 PM
TheFauxFox's Avatar
TheFauxFox TheFauxFox is offline
Heavy Contributor
 

Join Date: Oct 2013
Location: Auburn, AL
Posts: 749
Default

Yea, as I'm not going to be "Really" welding, I don't think I want to deal with Mig/Tig and buying gasses (keep in mind I'm also on a crazy low budget...it doesn't mean cheap out on everything, but I have to work with what I can get my hands on... ). So really it's looking for a decent inexpensive flux or buying this arc, arc WORKS but flux style is easier... Isn't flux essentially mig but with the shielding gas "built in" to the spool? Anyhow, the guy still hasn't emailed me back (didn't leave a # so I couldn't call) so its not like I COULD buy it...

I'll keep looking... Thanks for the great input, guys!
__________________
Yerf-Dog Spiderbox
Reverse Gearbox
Heavy Duty Ball Joints
Heavy Duty Chain Tensioner
Canvas Roof/Netting
Key Start
LED Brake Lights
Headlights

SOLD!
Reply With Quote
  #12  
Old 04-14-2014, 08:39 PM
2SlickNick's Avatar
2SlickNick 2SlickNick is offline
Senior Member
 

Join Date: Mar 2013
Location: Gilbert, AZ.
Posts: 1,268
Default

Quote:
Originally Posted by TheFauxFox View Post
Yea, as I'm not going to be "Really" welding, I don't think I want to deal with Mig/Tig and buying gasses (keep in mind I'm also on a crazy low budget...it doesn't mean cheap out on everything, but I have to work with what I can get my hands on... ). So really it's looking for a decent inexpensive flux or buying this arc, arc WORKS but flux style is easier... Isn't flux essentially mig but with the shielding gas "built in" to the spool? Anyhow, the guy still hasn't emailed me back (didn't leave a # so I couldn't call) so its not like I COULD buy it...

I'll keep looking... Thanks for the great input, guys!
I think a Flux core mig is just the thing you need. I am amazed of the love for welding I have now.. Mine is a TSC mig and I have done some amazing stuff with it. I have actually welded my special needs boy a swing and made him other various things like ramps for his wheelchair. Very versatile these flux core migs are. Research, buy new flux core and read directions FULLY. and read and watch you tubes DIY vids.
__________________
Growing old is mandatory
Growing up is optional
https://www.youtube.com/watch?v=NEXoa-8d7qE
Reply With Quote
  #13  
Old 04-14-2014, 08:45 PM
TheFauxFox's Avatar
TheFauxFox TheFauxFox is offline
Heavy Contributor
 

Join Date: Oct 2013
Location: Auburn, AL
Posts: 749
Default

Quote:
Originally Posted by 2SlickNick View Post
I think a Flux core mig is just the thing you need. I am amazed of the love for welding I have now.. Mine is a TSC mig and I have done some amazing stuff with it. I have actually welded my special needs boy a swing and made him other various things like ramps for his wheelchair. Very versatile these flux core migs are. Research, buy new flux core and read directions FULLY. and read and watch you tubes DIY vids.
Well that arc welder is SOLD. Someone got to it before me, so next time I look it'll be at a flux! Mig/TIG is too expensive/advanced for me (I don't need that kind of thing) and I'd be willing to get an arc, but flux seems to be the best bet. Again, this info is invaluable! Thanks
__________________
Yerf-Dog Spiderbox
Reverse Gearbox
Heavy Duty Ball Joints
Heavy Duty Chain Tensioner
Canvas Roof/Netting
Key Start
LED Brake Lights
Headlights

SOLD!
Reply With Quote
  #14  
Old 04-15-2014, 07:52 AM
bear's Avatar
bear bear is offline
Senior Member
 

Join Date: Mar 2012
Location: cincy,ohio
Posts: 1,347
Default

Hey it's just like the right buggy, sometimes you just have to wait for it to come along!
Reply With Quote
  #15  
Old 04-18-2014, 11:09 AM
wildbob wildbob is offline
Heavy Contributor
 

Join Date: Aug 2013
Location: Newburyport, MA
Posts: 571
Default

Ordered a Miller 140 autoset myself.. Can't wait to make some sparks.
__________________
2013 Trailmaster XRX 150 Type 86 stroker
Taida 4V head with 23/22mm valves, forged 4V piston,Taida 62mm jug,forged Taida 8200 KDU stroker crank, Koso high-flow oil pump, Taida case half w/ oil cooler ports, Setrab oil cooler,TrailTec Vapor, Mikuni VM26-606, aluminum 30mm intake, Uni filter, aluminum stack, Hammerhead racing exhaust, MotoRio adjustable CDI/HO Coil, Iridium plug, Full Dr Pulley CVT kit w/ 16g sliders, JD's Mikuni slide kit

2014 Kandi 90B
Reply With Quote
  #16  
Old 05-07-2014, 06:00 PM
TheFauxFox's Avatar
TheFauxFox TheFauxFox is offline
Heavy Contributor
 

Join Date: Oct 2013
Location: Auburn, AL
Posts: 749
Default

http://atlanta.craigslist.org/eat/tls/4439604419.html

the guy just re-listed it for 20$....I'm considering picking it up just to toy with it a little... at that price....
__________________
Yerf-Dog Spiderbox
Reverse Gearbox
Heavy Duty Ball Joints
Heavy Duty Chain Tensioner
Canvas Roof/Netting
Key Start
LED Brake Lights
Headlights

SOLD!
Reply With Quote
  #17  
Old 05-07-2014, 06:35 PM
2SlickNick's Avatar
2SlickNick 2SlickNick is offline
Senior Member
 

Join Date: Mar 2013
Location: Gilbert, AZ.
Posts: 1,268
Default

Well.... You might as well get it then. Have him show you how it works though.
__________________
Growing old is mandatory
Growing up is optional
https://www.youtube.com/watch?v=NEXoa-8d7qE
Reply With Quote
  #18  
Old 05-07-2014, 09:11 PM
TheFauxFox's Avatar
TheFauxFox TheFauxFox is offline
Heavy Contributor
 

Join Date: Oct 2013
Location: Auburn, AL
Posts: 749
Default

Agreed, Nick. Although I'm a bit wary of it being re-listed and much cheaper... I'll be careful here.

And like I said it's only $20


Edit: That being said, it'd be nice if I got an email back...
__________________
Yerf-Dog Spiderbox
Reverse Gearbox
Heavy Duty Ball Joints
Heavy Duty Chain Tensioner
Canvas Roof/Netting
Key Start
LED Brake Lights
Headlights

SOLD!

Last edited by TheFauxFox; 05-08-2014 at 08:13 PM.
Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:04 AM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.