|
|
|
#1
07-18-2018, 09:19 PM
|
||||
|
||||
Tires for Helix 150cc
So, on my first "Helix" I found the rear tires were bad. Looked at my failed attempt of a "Mud mower" and decided to put the 20x10x8 tires on the helix. I kept the stock rims. The tires fit well. Now I am looking at the front tires on helix and also can be replaced. Now my question is Would I be able to put 20x10x8 in the front? I noticed even the stock tires were (I think) 19 rear and 17 front. Do the front need to be smaller? The rims in front are the same in rear so I am assuming the "offset" will work.
__________________
HELIX 150cc 
|
|
#2
07-18-2018, 11:58 PM
|
|||
|
|||
|
I run 23's (23x8-11 on old honda atv rims) on the front and rear of my kinroad. Only problem you need to watch for is if the tire rubs when turned to full lock. On the 2+5 front rims I run a 1 inch spacer and they will rub if I crank it really hard.
To answer your question no you don't have to have smaller on the front. A few guys on here run 22's in the front and 20s in the rear. The larger front helps climb over stuff a bit better. 20s is supposed to be about all the stock gy6 can turn over and 22's is what most can fit in the front without rubbing problems.
|
 |
|
|
