|
|
|
|||||||
| Electrical Tech General Tech for Electrical issues not related to specific engines (Lights etc) |
|
|
Thread Tools |
|
#1
06-11-2012, 07:42 PM
|
|||
|
|||
slgk-160 missing electical part
Hi I have a slgk-160 problem when i turn the key nothing happens .I jumped the starter and it turns over but no spark & head lights do not work. in the electric box above the engine i have a plug with 4 wires red, black, black & white &,grey but nothing to plug it into? could i be missing a part? is this my problem? See pics
|
|
#3
06-11-2012, 10:01 PM
|
||||
|
||||
|
I agree about the empty plug- the big blue box looks like some kind of relay for the starter since it has such a heavy gauge red wire. I've not worked or seen one of these buggies- but you have electrical I don't normally see, the 2 wires(white & red) on the right appears to be another type of relay .Does this have a remote/handheld kill switch? that's what the 3 wires (blue,white,red/black)going into the thin white part/box at the bottom looks like.
|
|
#5
06-11-2012, 10:44 PM
|
||||
|
||||
|
the carter engine/harness i have has a relay, but it's up at the instrument panel. if the kill switch wires aren't connected together (i don't have a switch) it clicks, so it's definitely part of the starting circuit. I'll check tomorrow to see what config the terminals are in and what brand/# it is.
I also have a sunl, SGA-150. harness for that is in the basement at the moment, not even sure if it's all there, i'll check that out too. Did you just get this buggy? |
|
#7
06-12-2012, 08:29 AM
|
||||
|
||||
|
Nothing in the harness pieces I have for my Sunl appears to have a relay. that isn't to say it didn't have one though. Some not-too-mechanically inclined hands took it apart before i got it.
The relay with my Carter Talon harness is a common single pole single throw automotive type. terminal configuration matches your plug, and the numeric terminal IDs and functions match the relay below. Link below has a commonly available version. worth a shot for the price. With it removed from my harness, I get nothing at all at when i turn the key. Pretty sure it's basically the secondary ignition circuit tied into the safety switch. Previously i stated "kill" switch when i meant the two wires on mine that at one point probably went to a brake pedal safety switch. With the relay connected and the safety switch wires disconnected from one another, the relay clicks. http://www.radioshack.com/product/in...uctId=3020762# Last edited by x-bird; 06-12-2012 at 08:37 AM. |
|
#9
06-13-2012, 02:23 PM
|
||||
|
||||
|
it might, if the relay has a little schematic on the side of it, post a picture of it. it may not have the correct switching function for what you need. Also make sure the fuse on your positive wire isn't blown.
|
|
#10
06-13-2012, 05:12 PM
|
|||
|
|||
|
here is a pic of the relay box. top & mid pin power to lamps, right pin to ground, bottom pin to fused power, left pin to switch, is what the box says .
my actual connector does not have a wire on the top pin. i am in the proccess of tracking wires to see if they match relay. |
|
#12
01-02-2014, 06:55 PM
|
||||
|
||||
|
welcome bestdaddy what do you mean your plug is empty? does that mean it doesn't have a spark plug in it? it well help if you can tell us what kind of buggy it is.
|
|
#13
01-02-2014, 06:56 PM
|
||||
|
||||
|
also the name brand of the motor if possible
|
|
#15
07-14-2014, 03:00 AM
|
||||
|
||||
|
Try this free troubleshooting guide, good place to get parts also.
http://www.kazumaracing.com/trouble-...s-p-13392.html |
|
#16
07-14-2014, 03:05 AM
|
||||
|
||||
|
Check out this great thread from JakeTheSnake; manuals, circuit diagrams
http://www.buggymasters.com/forum/showthread.php?t=682 Also, my own limited views on your problem in attached |
|
|
[SIGPIC] Take What You Have and Build What You Need
