|
|
|
|||||||
| Mini Buggy General Discussion General Discussion forum for Mini Buggies. (American Sportworks, HammerHead, Carter, etc) |
 |
|
|
Thread Tools |
|
#1
04-22-2015, 05:07 PM
|
|||
|
|||
carter gtr 250
I recently bought a carter gtr 250. The ignition switch does not work. what wires do I need to jumper in order to try and start it up? It is a five wire. I bought a five wire switch for a buggy but the connectors are not the same.
|
|
#2
04-24-2015, 11:06 PM
|
|||
|
|||
|
Ok i got a new switch for a buggy. it is a five wire switch but the connector was wrong. i added the correct connector but i still have no spark. when the switch is on, i have horn, lights, and turn signal. when i turn to start the starter spins but i still have no spark. could i still have the switch wired up wrong? someone please help.
|
|
#3
04-25-2015, 06:28 AM
|
|||
|
|||
|
It is probably your CDI or your coil if you aren't getting any spark.
__________________
Trailmaster XRX 150  TK Variator and 1500 Spring  SYC Performance Ported & Polished & Shaved 2 Valve Head, A-10 Camshaft, R2C Filter, and Hammerhead Exhaust  Hammerhead 250GTS White Torque and Clutch Springs, 18g Rollers, R2C Filter, Ported Polished and Shaved Head, Hammerhead Exhaust
|
|
#4
04-25-2015, 03:11 PM
|
|||
|
|||
|
Verify the wiring is correct, then work from there.
|
|
#5
05-01-2015, 09:19 PM
|
|||
|
|||
|
It ended up being the switch. ordered a new one and now i have spark. Still doesnt run so now
i guess i have a carburetor problem.
|
|
|
|
