|
|
|
|||||||
| 150cc GY6 and Under Engine Tech GY6 and Smaller Technical Discussion Forum |
|
|
Thread Tools |
|
#1
12-30-2010, 10:42 AM
|
||||
|
||||
New Exhaust pipe
Hey guys, long time no see but the Helix is running just as strong as ever!
I was about to post here questioning about this new modification ASW has on their exhaust. Turns out after a quick exchange of emails that they have added an air injector to the exhaust system. I was wondering what the extra part we received was for. Just thought I'd share it with everyone in case not many knew about this unless they bought a recent ASW machine... Now time for me to finish up installing this new tail light I'm adding to my light system and test out the new exhaust 
|
|
#2
12-30-2010, 03:13 PM
|
||||
|
||||
|
That is emissions junk that has been added. It is not an improvement and will reduce performance.
__________________
08 Joyner SV 250 17grm sliders,white main spring,UNI,130 main,40 pilot,22x810 Kenda Front Max,23x10x10 ITP Muddlites 08 ASW Carbide (my son's)Lots of mods |
|
#3
12-30-2010, 03:27 PM
|
||||
|
||||
|
I agree that it reduces performance as I tested them with and without.cap it off-
|
|
#4
12-30-2010, 04:40 PM
|
||||
|
||||
|
Well good thing I ended up capping it off - the attachment wouldn't even fit. Battery was in the way.
|
|
#5
12-30-2010, 05:20 PM
|
||||
|
||||
|
That came on the machine factory stock?
|
|
#6
12-31-2010, 08:05 AM
|
||||
|
||||
|
Nope, this was a replacement muffler straight from the factory. I've gone through 3 mufflers, and this last one had this mod for some reason.
|
|
#7
12-31-2010, 05:27 PM
|
||||
|
||||
|
Has the muffler failed or is the pipe breaking?I have a lot of pipe breakage and found that if you weld a 3/8' rod that matches the bent eliminates that problem.
|
|
#8
12-31-2010, 05:56 PM
|
||||
|
||||
|
The muffler failed several times on me, the baffle plate on the inside keeps coming loose. If I shake the thing, it'll rattle badly. The new one's holding up as of one run so far.
|
|
#9
12-31-2010, 06:09 PM
|
||||
|
||||
|
As many times as you've replaced it you could have bought a FMF slip on 2 or 3 times over and had better preformance.
__________________
08 Joyner SV 250 17grm sliders,white main spring,UNI,130 main,40 pilot,22x810 Kenda Front Max,23x10x10 ITP Muddlites 08 ASW Carbide (my son's)Lots of mods |
|
|
