|
|
|
|||||||
| 150cc GY6 and Under Engine Tech GY6 and Smaller Technical Discussion Forum |
|
|
Thread Tools |
|
#1
01-02-2012, 03:10 PM
|
|||
|
|||
reaction 150
Need Help!!! go kart won't go. I have a Baja Reaction BR-150 L4V. Engine runs, clutch spins, and looks ok outside, (I can't get the nut off clutch to take it appart though). Transmission gears look good when I took the cover off, shifter moves in forward and reverse. I think there is something going on between the centrifugal clutch and the transmission but can't find what the connection is. Is there a gear somewhere i'm not seeing?
|
|
#2
01-02-2012, 08:46 PM
|
||||
|
||||
|
I have the same buggy.
The clutch bell should be directly connected with the transmission input shaft. Turning the bell should turn those gears! I know the shifter cables on these are very sensitive about how they are adjusted. The shift cables on these tend to get frozen in the cable sheath. There are a number of threads on how to lube them up, it is a common problem. Also, with this buggy, when the rpm's are too high it won't shift between gears. (F-N-R)
__________________
'07 Baja Reaction '05 Yerf 3206 Front end hangin' on by a shoestring  '07 roketa gk-17 -Chassis work in progress! '08 Crossfire 150R - It lives at last! 
Last edited by edroden; 01-02-2012 at 08:52 PM. |
|
#4
01-03-2012, 12:51 PM
|
|||
|
|||
|
the belt is ok but turning the bell on the clutch does nothing. after looking at the manuals (thanks for those) i need to get the clutch off and see what's going on in the transmission. Thanks for all the help... this has been a great forum.
|
|
#5
01-03-2012, 04:21 PM
|
||||
|
||||
|
You will need a impact to get that nut off of there easily!
__________________
'07 Baja Reaction '05 Yerf 3206 Front end hangin' on by a shoestring '07 roketa gk-17 -Chassis work in progress! '08 Crossfire 150R - It lives at last!
|
|
|
