|
150cc GY6 and Under Engine Tech GY6 and Smaller Technical Discussion Forum |
|
Thread Tools |
#1
|
|||
|
|||
fox carbide was running great now wont take the gas
was running great then acted like it was running out of gas.but still had a half a tank.runs about 1/3 throttle but anymore it shuts down. thanks in advance
|
#2
|
||||
|
||||
just FYI, if it takes you a month to answer back like it did last time you posted a problem, not many people will be in a hurry to help you. just saying, not trying to be rude.
|
#3
|
|||
|
|||
don't get on here much. Been too busy and I am kind of computer illiterate .but I am learning
|
#4
|
||||
|
||||
If it is a vac activated fuel valve you may want to check the filter in the tank, the vacuum lines are hooked up properly (2 lines vac on the bottom) and there is no leaks in the vac lines or the manifold. After you check these issues let us know what you find.
|
#5
|
||||
|
||||
hey don"t worry about not knowing much about computers, we are here for the buggies not to judge ones skill on the computer. As long as we can understand what you want to know is all that matters.
|
#6
|
|||
|
|||
has gravity fed fuel, check all clamps and screws on carb and also manifold bolts. everything was tight.fired it up and stilled missed.then all of sudden it went to running right. must have been trash in carb
|
#7
|
||||
|
||||
Glad you got it right. Like z said there's always someone here just keep us updated.
|
#8
|
|||
|
|||
asw 150 will not take gas
hello to everyone out there.just wanted to ask if anyone had any idea about this buggy i picked up.when i got it. it wouldnt run.got a new carb,coil,gas filters and hoses.it runs now but will not take gas.acts like its out of time.someone said, if it was out of time it wouldent start at all.i have no idea.does anyone have any idea what i should do next.THANKS TO ALL.....
|
|
|