|
250cc and Above Engine Tech Technical Discussion Forum for 250cc and up Engines |
|
Thread Tools |
#1
|
||||
|
||||
250cc ssr " kinroad, roketa, kandi" buggy , stuck in neutral
Ok went to a river, had a great time,* but when I was loading my buggy onto trailer, noticed it was hard to go into reverse, then when I got home, buggy was stuck in neutral .* Gear selector level on reverse gear box was moving but wasnt getting anywhere, then notice the shaft had on the lever was sticking out by 2inchs. So i jacked up the rear of the buggy, then I slide shaft back in and it would just get stuck in reverse or foward with that I knew and hoped it was only the shift fork. So I decided to pull it off and investigate.* I was right and lucky my gears werent sheared and were all good. I also locktited the bolt on inside of the shift fork. So I couldnt wait for gasket to come. I got some red rtv and sealed it. Works better than when I got it lol |
#2
|
|||
|
|||
Lucky that nut didn't get into the gears.
|
#3
|
|||
|
|||
Yea really lucky. Probably fell off right when you got it back. Good find never the less
|
#4
|
||||
|
||||
Yup, thanks guys, you know anybody who buggies around cali area? I got a decent river by me and pismo / oceano dunes is 2hrs from me.
|
#5
|
||||
|
||||
It was a whole lot easier finding the groove on the selector shaft with the gear box on the table then I. The buggy.
|
|
|