BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum

Go Back   BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum > Technical Discussions > Electrical Tech

Electrical Tech General Tech for Electrical issues not related to specific engines (Lights etc)

 
 
Thread Tools
  #1  
Old 10-19-2019, 10:21 AM
Jebuild Jebuild is offline
Lurker
 

Join Date: Oct 2019
Posts: 1
Default 2014 Trailmaster 150 dead and blowing cdi box

So this is gonna be a long story.

A friend of mine was in the backyard driving around and rolled it on its side. The motor cut. Okay no biggie. Righted it went to start it completely dead. After searching for possible causes I read threads say possible kill switch. Replaced it nothing. Ignition Switch replaced nothing. Found fuse was popped. Replaced fuse turned key pop. Okay looked for chafed wire nothing. Put a 20 amp fuse in melted cdi box. Okay maybe had a a bad box. Bought another and it keeps melting the box once you turn the key to the on position. I also discovered the 5 pin relay was sending a signal to the solenoid. So even without the 5 pin relay in it still keeps smoking the box. So what started out fun just driving my nephews gocart has turned into a dead buggy in my garage. Any tips would be most helpful..... Thanks in advance.
  #2  
Old 10-20-2019, 02:53 PM
SYCARMS's Avatar
SYCARMS SYCARMS is offline
Supporting Vendor
 

Join Date: Sep 2009
Location: Senatobia, Mississippi
Posts: 3,375
Default

Bad short somewhere. 20 amp
fuse too big needs a 10 amp quick blow. Need to find a hot touching or pinched wires.
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:38 AM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.