|
|
|
|||||||
| 150cc GY6 and Under Engine Tech GY6 and Smaller Technical Discussion Forum |
|
|
Thread Tools |
|
#1
05-02-2019, 08:36 AM
|
|||
|
|||
2017 HH 150 GTS - Gearbox sensor
There is a sensor right behind the gearbox arm on my 2017 Hammerhead GTS 150. This sensor is not currently connected to anything. I see no matching connector on any part of the wiring harness. I removed the sensor and it looks like it's either for transmission fluid temperature or level (I know, no guff).
I don't see this sensor in any parts diagram I've been able to locate online. Does anyone out there have a 2017 HH 150 and, if so, is this sensor connected to anything on your buggy? I bought this buggy used for a low price and it had a hard life. It's nearly 100 percent back to operating like new again. |
|
#2
05-03-2019, 08:05 AM
|
|||
|
|||
|
My guess would be a F-N-R indicator, or maybe just neutral.
__________________
2013 Trailmaster XRX 150 Type 86 stroker Taida 4V head with 23/22mm valves, forged 4V piston,Taida 62mm jug,forged Taida 8200 KDU stroker crank, Koso high-flow oil pump, Taida case half w/ oil cooler ports, Setrab oil cooler,TrailTec Vapor, Mikuni VM26-606, aluminum 30mm intake, Uni filter, aluminum stack, Hammerhead racing exhaust, MotoRio adjustable CDI/HO Coil, Iridium plug, Full Dr Pulley CVT kit w/ 16g sliders, JD's Mikuni slide kit 2014 Kandi 90B |
|
#4
05-12-2019, 05:46 PM
|
|||
|
|||
|
I still don't know. One of these days I'll get it figured out.
|
|
#6
05-19-2019, 08:07 PM
|
|||
|
|||
|
Yeah from the picture it looks like a neutral safety switch
|
|
#7
02-20-2020, 09:43 PM
|
|||
|
|||
|
Forgive me. I am new on here. I have a dong fang 170 go kart. I filled my tranny till oil came out the fill hole. Am I right? I have seen others measure one pint, and no more.
|
|
|
