BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum

Go Back   BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum > Technical Discussions > 150cc GY6 and Under Engine Tech

150cc GY6 and Under Engine Tech GY6 and Smaller Technical Discussion Forum

Reply
 
Thread Tools
  #1  
Old 09-24-2010, 09:52 PM
klsct99 klsct99 is offline
Lurker
 

Join Date: Sep 2010
Posts: 1
Unhappy charging issues

i have a helix 6150 kart. I have changed the stator and voltage regulator due to some stupid things i done with a battery charger earlier. now i dont have any battery charging. heres the wierd thing. according to the serv. man. test chart, this is the problem. says it should have .2 to .4 ohms resistance on white charging wire and ground, but meter shows OL. but when running stator puts out between 22 and 100 volts ac to regulator. changed regulator agian and nothing. i only show battery voltage when running. when new, it showed 15.3 volts when running at battery. also regulator is diff than orig. but came from O.E supplier with instructions. choke is pluged into pig tail coming from reg. instead of main harness. ANY HELP WOULD BE GREATLY APPRECIATED.
Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:06 AM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.