BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum

Go Back   BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum > Technical Discussions > Electrical Tech

Electrical Tech General Tech for Electrical issues not related to specific engines (Lights etc)

 
 
Thread Tools
  #1  
Old 07-01-2012, 01:32 PM
Zapper Zapper is offline
Contributor
 

Join Date: May 2012
Location: Where else (Texas)
Posts: 181
Default Cdi

Well fellows an girls Learned a lesson.YOU CANNOT LEAVE KEY ON IT WILL GET THE CDI.
__________________
[SIGPIC] Take What You Have and Build What You Need
  #2  
Old 07-01-2012, 04:20 PM
kliff's Avatar
kliff kliff is offline
Contributor
 

Join Date: Mar 2010
Location: Grovetown, GA
Posts: 309
Default

Did not know that! Have, fortunately, never left a buggy or scooter key on though. Would not have thought that would burn one out either, because it should not build up any more heat, than if it was running.... interlestink, velllllly interlestink
__________________
kliff
  #3  
Old 07-01-2012, 04:27 PM
metalstudman1's Avatar
metalstudman1 metalstudman1 is offline
Super Moderator
 

Join Date: Aug 2009
Location: Belmont,NC (elevation 534')
Posts: 2,668
Default

Can't say that's true about all engines- The kid's leave the key on all the time (overnight) with the Honda TRX200SX engines and only had to jump start it. Can't remember how often this occured with the GY6's and didn't have a failure. What's the exact engine/buggy this occured with?
  #4  
Old 07-01-2012, 04:49 PM
Zapper Zapper is offline
Contributor
 

Join Date: May 2012
Location: Where else (Texas)
Posts: 181
Default Cdi

I have had prob. with this TRANTULA doing strange things.I don't know for sure could it be the reg.or coil.Tested coil no fire to it tested power to reg.
Really getting tired of testing .HEEEEEEEEEELLLLLLLLLLPPPPPPP.
__________________
[SIGPIC] Take What You Have and Build What You Need
  #5  
Old 07-01-2012, 04:53 PM
Zapper Zapper is offline
Contributor
 

Join Date: May 2012
Location: Where else (Texas)
Posts: 181
Default

I think that a complete rewire is in order.Anyone want to help,will supply beer.
__________________
[SIGPIC] Take What You Have and Build What You Need
  #6  
Old 07-01-2012, 04:59 PM
kliff's Avatar
kliff kliff is offline
Contributor
 

Join Date: Mar 2010
Location: Grovetown, GA
Posts: 309
Default

You're just a tad too far away for a "house call" Zapper...LOL...sorry.
__________________
kliff
  #7  
Old 07-01-2012, 05:05 PM
Zapper Zapper is offline
Contributor
 

Join Date: May 2012
Location: Where else (Texas)
Posts: 181
Default

Doesn't hurt to ask
__________________
[SIGPIC] Take What You Have and Build What You Need
  #8  
Old 07-01-2012, 05:09 PM
kliff's Avatar
kliff kliff is offline
Contributor
 

Join Date: Mar 2010
Location: Grovetown, GA
Posts: 309
Default

Not at all, wish I could be there.
__________________
kliff
  #9  
Old 07-01-2012, 06:23 PM
metalstudman1's Avatar
metalstudman1 metalstudman1 is offline
Super Moderator
 

Join Date: Aug 2009
Location: Belmont,NC (elevation 534')
Posts: 2,668
Default

I'd definitely help if I were closer- I'm not an electrican but when I have a buggy/whatever I always manage to figure it out thru common sense by simply tracing things down. I feel your frustration though- good luck and hope someone has answers for you.

Last edited by metalstudman1; 07-01-2012 at 07:19 PM.
  #10  
Old 07-01-2012, 06:29 PM
Zapper Zapper is offline
Contributor
 

Join Date: May 2012
Location: Where else (Texas)
Posts: 181
Default

I wish it was just points cond.coil I would be done with this.I will try to do a complete rewire connectors and all.
Thanks all it is hydrolic sandwiches and a big cigar.LOL
__________________
[SIGPIC] Take What You Have and Build What You Need
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:43 AM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.