BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum

Go Back   BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum > Technical Discussions > 150cc GY6 and Under Engine Tech
Reload this Page Voltage regulator
FAQ Calendar Arcade

150cc GY6 and Under Engine Tech GY6 and Smaller Technical Discussion Forum

 
 
Thread Tools
  #1  
Old 09-06-2011, 09:52 AM
joshstep1's Avatar
joshstep1 joshstep1 is offline
Senior Member
  

Join Date: Oct 2009
Location: Clarksville TN
Posts: 1,141
Default Voltage regulator
I need a voltage regulator for my ASW Carbide. I found it on buggy depot and it's backordered. I found it somewhere else but I just want to make sure it's the right one.

http://swaptchicago.com/en/gy6/31-11...rectifier.html

Please let me know if this will work
__________________
-Josh
My Ride:
ASW Carbide

Mods:
Dr. Pulley Hit Clutch
FMF Slip-On Exhaust
No Rev. CDI
Uni Air Filter
130 Main jet
1500 RPM main clutch spring
11g sliders
75w Halogen Headlights

CARBIDE!
  #2  
Old 09-07-2011, 11:34 AM
SYCARMS's Avatar
SYCARMS SYCARMS is offline
Supporting Vendor
  

Join Date: Sep 2009
Location: Senatobia, Mississippi
Posts: 3,375
Default
The link you sent shows a rectifier for an 11 pole stator, yours will be a 6 or 8 pole, the connection will be slightly differant. Carbide rectifier cost is about 20.00 + S/H.

TOM
  #3  
Old 09-07-2011, 11:51 AM
joshstep1's Avatar
joshstep1 joshstep1 is offline
Senior Member
  

Join Date: Oct 2009
Location: Clarksville TN
Posts: 1,141
Default
What throws me is that I have two carbides and they Have different rectifiers :/ how do I know which one will work?
__________________
-Josh
My Ride:
ASW Carbide

Mods:
Dr. Pulley Hit Clutch
FMF Slip-On Exhaust
No Rev. CDI
Uni Air Filter
130 Main jet
1500 RPM main clutch spring
11g sliders
75w Halogen Headlights

CARBIDE!
  #4  
Old 09-07-2011, 02:00 PM
SYCARMS's Avatar
SYCARMS SYCARMS is offline
Supporting Vendor
  

Join Date: Sep 2009
Location: Senatobia, Mississippi
Posts: 3,375
Default
What is differant with the rectifiers?

TOM
  #5  
Old 09-07-2011, 02:46 PM
joshstep1's Avatar
joshstep1 joshstep1 is offline
Senior Member
  

Join Date: Oct 2009
Location: Clarksville TN
Posts: 1,141
Default
The other rectifier (first picture) has a single four pin plug on it. The one I need (last three pictures) has two wires that come out of it. One has a four pin plug on it and the other wire runs to the front of the vehicle.
Attached Images
File Type: jpg pic1.jpg (15.5 KB, 9 views)
File Type: jpg pic2.jpg (15.2 KB, 10 views)
File Type: jpg pic3.jpg (13.7 KB, 9 views)
File Type: jpg pic4.jpg (18.0 KB, 9 views)
__________________
-Josh
My Ride:
ASW Carbide

Mods:
Dr. Pulley Hit Clutch
FMF Slip-On Exhaust
No Rev. CDI
Uni Air Filter
130 Main jet
1500 RPM main clutch spring
11g sliders
75w Halogen Headlights

CARBIDE!
  #6  
Old 09-07-2011, 03:02 PM
GX150's Avatar
GX150 GX150 is offline
Heavy Contributor
  

Join Date: Dec 2010
Posts: 645
Default
The BD regulator uses a 4-pin output and 3-pin input connector. It will work if you connect your 2-phase stator to 3-phase rectifier, but the connectors do not match.
  #7  
Old 09-07-2011, 03:17 PM
joshstep1's Avatar
joshstep1 joshstep1 is offline
Senior Member
  

Join Date: Oct 2009
Location: Clarksville TN
Posts: 1,141
Default
The BD regulator? What?
__________________
-Josh
My Ride:
ASW Carbide

Mods:
Dr. Pulley Hit Clutch
FMF Slip-On Exhaust
No Rev. CDI
Uni Air Filter
130 Main jet
1500 RPM main clutch spring
11g sliders
75w Halogen Headlights

CARBIDE!
  #8  
Old 09-07-2011, 03:41 PM
GX150's Avatar
GX150 GX150 is offline
Heavy Contributor
  

Join Date: Dec 2010
Posts: 645
Default
BD = Buggy Depot
  #9  
Old 09-07-2011, 03:53 PM
joshstep1's Avatar
joshstep1 joshstep1 is offline
Senior Member
  

Join Date: Oct 2009
Location: Clarksville TN
Posts: 1,141
Default
Yes but they ate backordered. I need it installed on my buggy by Oct. 8.
__________________
-Josh
My Ride:
ASW Carbide

Mods:
Dr. Pulley Hit Clutch
FMF Slip-On Exhaust
No Rev. CDI
Uni Air Filter
130 Main jet
1500 RPM main clutch spring
11g sliders
75w Halogen Headlights

CARBIDE!
  #10  
Old 09-07-2011, 04:17 PM
GX150's Avatar
GX150 GX150 is offline
Heavy Contributor
  

Join Date: Dec 2010
Posts: 645
Default
If Tom cannot help, I have a spare I can sell you.
  #11  
Old 09-07-2011, 04:19 PM
joshstep1's Avatar
joshstep1 joshstep1 is offline
Senior Member
  

Join Date: Oct 2009
Location: Clarksville TN
Posts: 1,141
Default
I don't mind buying from either one of you; I just want to KNOW I'm getting the right one!
__________________
-Josh
My Ride:
ASW Carbide

Mods:
Dr. Pulley Hit Clutch
FMF Slip-On Exhaust
No Rev. CDI
Uni Air Filter
130 Main jet
1500 RPM main clutch spring
11g sliders
75w Halogen Headlights

CARBIDE!
  #12  
Old 09-07-2011, 10:10 PM
joshstep1's Avatar
joshstep1 joshstep1 is offline
Senior Member
  

Join Date: Oct 2009
Location: Clarksville TN
Posts: 1,141
Default
GX150? Tom? Can SOMEONE lead me to a page that has the right one in stock?
__________________
-Josh
My Ride:
ASW Carbide

Mods:
Dr. Pulley Hit Clutch
FMF Slip-On Exhaust
No Rev. CDI
Uni Air Filter
130 Main jet
1500 RPM main clutch spring
11g sliders
75w Halogen Headlights

CARBIDE!
  #13  
Old 09-07-2011, 10:17 PM
GX150's Avatar
GX150 GX150 is offline
Heavy Contributor
  

Join Date: Dec 2010
Posts: 645
Default
I'm not a dealer. I have a good used one in my spare parts box.
  #14  
Old 09-07-2011, 10:30 PM
joshstep1's Avatar
joshstep1 joshstep1 is offline
Senior Member
  

Join Date: Oct 2009
Location: Clarksville TN
Posts: 1,141
Default
How do I know it's the right one?
__________________
-Josh
My Ride:
ASW Carbide

Mods:
Dr. Pulley Hit Clutch
FMF Slip-On Exhaust
No Rev. CDI
Uni Air Filter
130 Main jet
1500 RPM main clutch spring
11g sliders
75w Halogen Headlights

CARBIDE!
  #15  
Old 09-08-2011, 12:43 AM
SYCARMS's Avatar
SYCARMS SYCARMS is offline
Supporting Vendor
  

Join Date: Sep 2009
Location: Senatobia, Mississippi
Posts: 3,375
Default
Give me a call tomorrow 662-301-1563 or e-mail me your number with a time to call and I'll call you. tom@sycpowersports.com

TOM
  #16  
Old 09-08-2011, 08:19 AM
joshstep1's Avatar
joshstep1 joshstep1 is offline
Senior Member
  

Join Date: Oct 2009
Location: Clarksville TN
Posts: 1,141
Default
Ok...
__________________
-Josh
My Ride:
ASW Carbide

Mods:
Dr. Pulley Hit Clutch
FMF Slip-On Exhaust
No Rev. CDI
Uni Air Filter
130 Main jet
1500 RPM main clutch spring
11g sliders
75w Halogen Headlights

CARBIDE!
 

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 09:09 PM.

Contact Us - BuggyMasters An on line mini buggy forum and go kart forum - Archive - Top

Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.