BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum

Go Back   BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum > Technical Discussions > Go Kart Engine and Torque Converter Tech

Go Kart Engine and Torque Converter Tech Forum for discussing go kart engines and torque converters (Briggs, Tecumseh, Suburu, Comet etc)

 
 
Thread Tools
  #1  
Old 10-14-2013, 04:09 PM
sleepyrz sleepyrz is offline
Lite Contributor
 

Join Date: Oct 2013
Location: miami
Posts: 45
Default 5 speed gy6 transmission

http://www.youtube.com/watch?v=zPMCsPdro6U

composimo

interesting...........


they also have the gy6 carb riser for 30$

http://www.composimo.com/GY6-_c_8.html

just came across this today and was wondering peoples thoughts on that 5 speed

oh and if you know of any other source for gy6 manifold risers
  #2  
Old 11-11-2013, 02:44 PM
toomanytoys2's Avatar
toomanytoys2 toomanytoys2 is offline
Contributor
 

Join Date: Sep 2012
Location: Lefty California
Posts: 284
Default

If you need a manifold riser to clear the motor mount, that looks like a fairly nice setup. Even with all the tools that I have at my disposal, it would be hard pressed to make something for that price. Just the price of materials and the time to make the price pretty attractive.
__________________
2005 Hammerhead 150
170cc BBK, PnP Big valve Head, A12 Cam, Uni Filter, Custom Exhaust, 10G rollers, 1500 Contra Spring, 2000 Clutch Springs

Just added - 2007 Joyner 250 SV - Let the fun begin

4-Dirt Bikes, Baja Bug and enough toys to keep me in the garage and out of trouble.
  #3  
Old 11-11-2013, 03:20 PM
wildbob wildbob is offline
Heavy Contributor
 

Join Date: Aug 2013
Location: Newburyport, MA
Posts: 571
Default

putting a riser on my buggy, getting the manifold bolt studs out is proving to be a pain.
__________________
2013 Trailmaster XRX 150 Type 86 stroker
Taida 4V head with 23/22mm valves, forged 4V piston,Taida 62mm jug,forged Taida 8200 KDU stroker crank, Koso high-flow oil pump, Taida case half w/ oil cooler ports, Setrab oil cooler,TrailTec Vapor, Mikuni VM26-606, aluminum 30mm intake, Uni filter, aluminum stack, Hammerhead racing exhaust, MotoRio adjustable CDI/HO Coil, Iridium plug, Full Dr Pulley CVT kit w/ 16g sliders, JD's Mikuni slide kit

2014 Kandi 90B
  #4  
Old 11-11-2013, 03:25 PM
Miamieddie's Avatar
Miamieddie Miamieddie is offline
Heavy Contributor
 

Join Date: Jan 2012
Location: miami. florida
Posts: 610
Default

I believe (syc) has it and (buggypartsnw.com) has the riser also.
__________________
2. 150cc carters. 1. Baja reaction 150cc dr2 variators Jerseydevil hp. Pipes unifilters gates belts. Yellow main springs hd. Orange coils.
  #5  
Old 11-11-2013, 03:28 PM
Miamieddie's Avatar
Miamieddie Miamieddie is offline
Heavy Contributor
 

Join Date: Jan 2012
Location: miami. florida
Posts: 610
Default

Stud remover kit and wd-40 will do the trick for removing studs
__________________
2. 150cc carters. 1. Baja reaction 150cc dr2 variators Jerseydevil hp. Pipes unifilters gates belts. Yellow main springs hd. Orange coils.
  #6  
Old 11-11-2013, 04:34 PM
351mustanger 351mustanger is offline
Contributor
 

Join Date: Jul 2013
Location: Cincinnati, Ohio
Posts: 160
Default

Did you try double nutting them?
  #7  
Old 11-11-2013, 05:22 PM
wildbob wildbob is offline
Heavy Contributor
 

Join Date: Aug 2013
Location: Newburyport, MA
Posts: 571
Default

Dont want to hijack this thread, but, yeah double nutted, bottom nut just smooshes, I'll buy some quality nuts at the depot or something, these were the nuts that held the stock intake down..
__________________
2013 Trailmaster XRX 150 Type 86 stroker
Taida 4V head with 23/22mm valves, forged 4V piston,Taida 62mm jug,forged Taida 8200 KDU stroker crank, Koso high-flow oil pump, Taida case half w/ oil cooler ports, Setrab oil cooler,TrailTec Vapor, Mikuni VM26-606, aluminum 30mm intake, Uni filter, aluminum stack, Hammerhead racing exhaust, MotoRio adjustable CDI/HO Coil, Iridium plug, Full Dr Pulley CVT kit w/ 16g sliders, JD's Mikuni slide kit

2014 Kandi 90B
  #8  
Old 11-11-2013, 06:47 PM
2SlickNick's Avatar
2SlickNick 2SlickNick is offline
Senior Member
 

Join Date: Mar 2013
Location: Gilbert, AZ.
Posts: 1,268
Default

As much as I like the convience of the CVT, I would love to be able control my buggy with an automatic clutch system.
__________________
Growing old is mandatory
Growing up is optional
https://www.youtube.com/watch?v=NEXoa-8d7qE
  #9  
Old 11-11-2013, 07:36 PM
Masteryota's Avatar
Masteryota Masteryota is offline
Senior Member
 

Join Date: Dec 2012
Location: North Florida
Posts: 1,155
Default

Quote:
Originally Posted by wildbob View Post
putting a riser on my buggy, getting the manifold bolt studs out is proving to be a pain.
I pulled mine out before I shipped the engine, and they came out pretty easily. The old school stud removers are not that expensive and can normally be found at the parts store. They tend to chew up the threads, but since you are not reusing them, no worries.
__________________
ASE Master and Toyota Master Diagnostic Certified
Buggy Building Trainee

'04 Dazon Raider 150 'modded'
  #10  
Old 11-11-2013, 08:35 PM
351mustanger 351mustanger is offline
Contributor
 

Join Date: Jul 2013
Location: Cincinnati, Ohio
Posts: 160
Default

Just don't break them off. Some penetrating oil and/or heat can be a big help along with some patience. I pulled the intake and exhaust studs out using the double nut method with no problem. I installed them the same way.

Last edited by 351mustanger; 11-11-2013 at 08:37 PM.
  #11  
Old 11-11-2013, 09:34 PM
wildbob wildbob is offline
Heavy Contributor
 

Join Date: Aug 2013
Location: Newburyport, MA
Posts: 571
Default

yup, $30 at autozone for a set of metric extractors..suckers popped right out 6mm size for the studs. FYI
__________________
2013 Trailmaster XRX 150 Type 86 stroker
Taida 4V head with 23/22mm valves, forged 4V piston,Taida 62mm jug,forged Taida 8200 KDU stroker crank, Koso high-flow oil pump, Taida case half w/ oil cooler ports, Setrab oil cooler,TrailTec Vapor, Mikuni VM26-606, aluminum 30mm intake, Uni filter, aluminum stack, Hammerhead racing exhaust, MotoRio adjustable CDI/HO Coil, Iridium plug, Full Dr Pulley CVT kit w/ 16g sliders, JD's Mikuni slide kit

2014 Kandi 90B
  #12  
Old 11-12-2013, 12:31 PM
SYCARMS's Avatar
SYCARMS SYCARMS is offline
Supporting Vendor
 

Join Date: Sep 2009
Location: Senatobia, Mississippi
Posts: 3,375
Default

Just looking at the engine in the video, it did not look like a GY6 engine.
  #13  
Old 11-12-2013, 01:38 PM
2SlickNick's Avatar
2SlickNick 2SlickNick is offline
Senior Member
 

Join Date: Mar 2013
Location: Gilbert, AZ.
Posts: 1,268
Default

I need to remove my intake studs from cylinder head. I am reading this correctly? You used a stud remover? Hopefully that will be one of the tools autozone rents out, for me anyways...
__________________
Growing old is mandatory
Growing up is optional
https://www.youtube.com/watch?v=NEXoa-8d7qE
  #14  
Old 11-12-2013, 01:51 PM
wildbob wildbob is offline
Heavy Contributor
 

Join Date: Aug 2013
Location: Newburyport, MA
Posts: 571
Default

yup they rent 'em too
__________________
2013 Trailmaster XRX 150 Type 86 stroker
Taida 4V head with 23/22mm valves, forged 4V piston,Taida 62mm jug,forged Taida 8200 KDU stroker crank, Koso high-flow oil pump, Taida case half w/ oil cooler ports, Setrab oil cooler,TrailTec Vapor, Mikuni VM26-606, aluminum 30mm intake, Uni filter, aluminum stack, Hammerhead racing exhaust, MotoRio adjustable CDI/HO Coil, Iridium plug, Full Dr Pulley CVT kit w/ 16g sliders, JD's Mikuni slide kit

2014 Kandi 90B
  #15  
Old 07-23-2018, 11:21 AM
hondamark35 hondamark35 is offline
Lurker
 

Join Date: Nov 2017
Posts: 11
Default I know, I know... back from the dead

Quote:
Originally Posted by SYCARMS View Post
Just looking at the engine in the video, it did not look like a GY6 engine.
I know this is an old thread but for the sake of anyone who stumbles across the title:

Lifan 125cc

the engine used in the video is common in pit bikes and small motorcycles and dirt bikes. I've seen them used for "shifter" carts as well. it's not a GY6 but seems nearly as common and it looks like some parts may be shared (ignition parts and potentially the carb and starter on some models)
  #16  
Old 07-23-2018, 11:44 AM
SYCARMS's Avatar
SYCARMS SYCARMS is offline
Supporting Vendor
 

Join Date: Sep 2009
Location: Senatobia, Mississippi
Posts: 3,375
Default

That is the CT-125 engine used in pit bikes, the CT-50,70,90,and 110 were used in small buggies with some having a 2 and 3 speed shuttle shift transmission with reverse. The 4 and 5 speed transmissions were all manual shift and have no reverse.
  #17  
Old 07-23-2018, 11:37 PM
neo71665 neo71665 is offline
Contributor
 

Join Date: Jun 2017
Posts: 284
Default

There are also 125/150 versions on the chinese 4 wheelers with reverse. Maybe a 110 but I've only seen the forward only ones. Not sure of the number name of them.
  #18  
Old 08-19-2018, 01:45 AM
sleepyrz sleepyrz is offline
Lite Contributor
 

Join Date: Oct 2013
Location: miami
Posts: 45
Default

It's a Lifan 125cc semi auto 4spd.
It can cruises around at about 65mph no problem, and can go faster depending on the sprocket used.
  #19  
Old 08-19-2018, 12:13 PM
scjeep4.7HO scjeep4.7HO is offline
Contributor
 

Join Date: Apr 2015
Location: Virginia
Posts: 197
Default

I need one of these to help me with that cross brace.
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:29 PM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.