BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum

Go Back   BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum > Technical Discussions > 150cc GY6 and Under Engine Tech

150cc GY6 and Under Engine Tech GY6 and Smaller Technical Discussion Forum

 
 
Thread Tools
  #1  
Old 07-05-2012, 04:59 PM
cuda6768 cuda6768 is offline
Lurker
 

Join Date: Jul 2012
Posts: 4
Default Fires one time

I have a gy6 150cc engine it fires one time when you turn it over, you wait a while and turn it over and it will fire one time this is with a test plug. will a cdi fix this problem
  #2  
Old 07-05-2012, 05:24 PM
chuckorlando chuckorlando is offline
Contributor
 

Join Date: Apr 2010
Posts: 356
Default

Doubtfull. Sounds like the floats running out of gas or blocked fuel line or screwy vacum petcock. cdi usually just go out and coils either go out or break down after getting hot.

You need to check the spark from the cdi to coil when it wont start. Hell just check for spark at the plug. If it aint sparking it's electrical. If it continues to spark but not fire it's mechanical
  #3  
Old 07-05-2012, 05:44 PM
cuda6768 cuda6768 is offline
Lurker
 

Join Date: Jul 2012
Posts: 4
Default

Maybe I worded it wrong the test plug fires one time this plug is not screwed into motor
  #4  
Old 07-05-2012, 05:52 PM
chuckorlando chuckorlando is offline
Contributor
 

Join Date: Apr 2010
Posts: 356
Default

Are you grounding it when testing? If so then the next step is to isolate where the spark is lost. Be it cdi or coil or even key. Most likely cdi or coil so I would test first the hot going into the coil. If it's good then test coming out of coil. Then check it coming out the coil it's self with no wire. If good then check resistance in the plug wire.
  #5  
Old 07-05-2012, 07:44 PM
cuda6768 cuda6768 is offline
Lurker
 

Join Date: Jul 2012
Posts: 4
Default

You must not know what a test plug is. It has a clamp on one side you atach to ground and put coil wire on plug end
  #6  
Old 07-05-2012, 10:24 PM
metalstudman1's Avatar
metalstudman1 metalstudman1 is offline
Super Moderator
 

Join Date: Aug 2009
Location: Belmont,NC (elevation 534')
Posts: 2,668
Default

My cdi and stator both were bad when this issue occurred. If it's not continuing to fire it's because it got just enough voltage to fire the CDI once and then not enough from the stator coil. Check the stator first as that is probably the problem.
  #7  
Old 07-05-2012, 10:46 PM
cuda6768 cuda6768 is offline
Lurker
 

Join Date: Jul 2012
Posts: 4
Default

Thank you that was what I wa thinking too
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:43 PM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.