Mounting gy6 muffler - part # for washer or bushing (picture)

[gidaeon]

I have a yerf dog spider box gx150 and the muffler totally fell off. I lost the bolt that mounts the muffler to the left side of engine. The hole on flange below is way too big for standard m8 bolt is there a special washer? If so I can't find part # (I have a manual and don't see it any diagrams)

[Big Rich]

Yeah, there's a stepped rubber bushing that is supposed to fit in the muffler hole, with 2 steel washers on the bolt (one on each side of the rubber bushing).

[ckau]

Originally Posted by Big Rich

Yeah, there's a stepped rubber bushing that is supposed to fit in the muffler hole, with 2 steel washers on the bolt (one on each side of the rubber bushing).

A parts inventory for these yerfs no longer exists. You have to be creative. A couple of fender washers will do the trick

[gidaeon]

Thanks.i guess gender washers it is. Was hoping the gy6 engine was so common the mount and rubber bushing would be super common, cheap and easy to find.

[scjeep4.7HO]

Look for rubber isolators. Shouldn't be too hard to find.