#1
|
||||
|
||||
manco helix 150 dies
i have a helix 150 from tsc what could make this buggy run for twenty minutes and die then wait 30 minutes start it up and it does the same thing all over again.
|
#2
|
||||
|
||||
welcome to the group
check the gas cap fuel filter
__________________
olderthan 2008 tomberline punisher 1500 spring 12g sliders 30mm cv pumper carb uni filter no rev cdi polaris xlt snowmobile shocks for front w/550 magnum springs & blaster fronts on rear and another buggy built working on mods gk-13 white spring 17 gram sliders so far |
#3
|
||||
|
||||
thanks but i checked the coil and that is what caused the problem
|
#4
|
||||
|
||||
glad you fixed it
__________________
olderthan 2008 tomberline punisher 1500 spring 12g sliders 30mm cv pumper carb uni filter no rev cdi polaris xlt snowmobile shocks for front w/550 magnum springs & blaster fronts on rear and another buggy built working on mods gk-13 white spring 17 gram sliders so far |
#5
|
|||
|
|||
i have one from tsc and the problem i am haveing is there is no spark to the spark plug.. ive replaced both coils the cdi the vlotage reg flywheel and still no spark.. all of the volts, ohms e.t.care all normal? what else should i look for.. this is driving me crazy...lol
|
|
|