|
250cc and Above Engine Tech Technical Discussion Forum for 250cc and up Engines |
|
Thread Tools |
#1
|
|||
|
|||
Space for aftermarket air filter on HH250ss?
I've read several forum strings about installing a UNI filter on the 250ss without any extension tubes aside for a single elbow fitting. I could use some help understanding how a UNI or KN filter with a 90 degree elbow connected directly to the carb can fit. It doesn't look like there is enough space between the carb intake and the frame behind the passenger seat to allow for the 90 degree elbow and much less for the larger filter on the end of it. Photos anyone?
Thanks, |
#2
|
|||
|
|||
Never Replace Your Air Filter Again
__________________
BacklinksVault |
#3
|
|||
|
|||
The uni is supposed to face upward wit hthe 90 degree elbo so it shouldnt hit the seat of frame. Atleast this is what it will do in the Baja Reaction 250 i recently picked up.
__________________
Trailmaster XRX 150 TK Variator and 1500 Spring SYC Performance Ported & Polished & Shaved 2 Valve Head, A-10 Camshaft, R2C Filter, and Hammerhead Exhaust Hammerhead 250GTS White Torque and Clutch Springs, 18g Rollers, R2C Filter, Ported Polished and Shaved Head, Hammerhead Exhaust |
|
|