Talon 150cc charging

[Talon12]

Guys, How do I check the charging system on a Carter 150cc. I have found that if I kkep the battery charged it will run. But after a few days the battery will go dead and the buggy will not start. I started it and check the boltage at the battery. It was 12.30 running. I rev it up and it did not change. This tells me that it is not charging. My question is where do I start? regulator? or stator? I suspect the stator because everything I do is the hard way. How do I check the stator to see if it is charging without buying one? And how to check the regulator?

I dont have wiring diagrams so I dont know which wires should be hot and whcih ones shouldn't be.

as long as the battery is charged the buggy runs good. But it is not charging

[D.L.]

Hello,
Im new to the forum. I had the same issue with my ASW 150cc BD-200 UTV. I replaced the regulator and it fixed my issue. I know there's video's on YouTube on testing the charging systems, i believe you get AC voltage out of the stator and the regulator converts it to DC while it's running.
Hope this helps,

[Talon12]

It was the stator. Change it out and now it is charging 13.6v.....happy happy

[bear]

Nothing better than fixin it ur self! welcome to the fun! keepem rollin bear