|
|
|
#1
03-04-2010, 07:29 AM
|
|||
|
|||
Help please
I have a carter talon with the gy6 and im looking to stick a street bike motor in it, now what would i have to do to make it work. what would i have to buy extra to make it fit and what will i have to modify. i will post pics of the proccess
|
|
#2
03-04-2010, 08:20 AM
|
|||
|
|||
|
i have been looking at youtube and it looks like the rear is extended, of coarse prob to compansate for the bigger motor. is there any easy way to do this? can i buy a rear end from something else to do this or can i just extend the origanal
|
|
#3
03-04-2010, 10:33 AM
|
||||
|
||||
|
what motor do you want to run?
if you can do without a street bike motor it would be easy to put a dirt bike motor in it.most of them are smaller than your 150 but make more power.a cr 250 is around 40hp or so and will fit were your 150 is so you dont have to extend the rear end. look at horsepower on some of the motors to see what you want and to give you an idea of how fast it will be think of this my buggy was about 500lbs with about 10hp so 1hp had to push 50lbs 500lbs with 40hp =1hp only pushing 12.5lbs 500lbs with 100hp=1hp pushing 5lbs look at the hp to lbs of a vet.or a viper that wont give you dead nut speed but will give a ball park
__________________
http://www.youtube.com/watch?v=IUgir...ature=g-t=2668 FABRICATION ITS HARDER THAN YOU THINK |
|
#4
03-05-2010, 08:45 AM
|
|||
|
|||
|
hey i never thought about a dirt bike motor. thanks that would be easier. would it bolt up like stock or what would i have to do to it? thanks for the idea great answere, im accually going to price some dirtbike motors
|
|
#5
03-05-2010, 12:06 PM
|
||||
|
||||
|
the d.b.motor wont have the same boilt pattern as your 150.you will have to build motor mounts. if you get the hole bike you could cut the frame out that holds the motor and weld it to the swing arm(the easiest way).keep in mind no reverse and most d.b.have a kick start but you can find some of them with electric start.
it would be best to get the hole bike if you can find one cheep so you can ride it and get the bugs worked befor you put it on the buggy and you will need some things off the bike. cluch cable cluch lever(or build a cluch pedal) all the wiring also dont pass a good atv motor so can you weld and do fab work?
__________________
http://www.youtube.com/watch?v=IUgir...ature=g-t=2668 FABRICATION ITS HARDER THAN YOU THINK |
|
#6
03-05-2010, 12:28 PM
|
||||
|
||||
|
i agree with sheepdog, i built a cart years ago with a dirt bike engine on it (125cc) and that thing had all kinds of torque and power. i've mentioned in other threads that if hammerhead or others would make a buggy with bike style power plant......man, i would be all over it. imagine the low end on that sucker....endless!! you could climb trees with it! i would like a set-up like a 400cc quad (with a clutch pack) but in a buggy cage.
__________________
07 HH250SS UNI HIT CLUTCH DR. PULLEY VARIATOR RED MAIN 17g ROLLERS 12T/45T SPROCKETS IRIDIUM PLUG HP CDI & COIL LED LIGHTS ASW CARBIDE UNI 12g SLIDERS RED MAIN 39T SPROCKET (coming soon) |
|
#7
03-05-2010, 01:01 PM
|
|||
|
|||
|
i can weld some but i was thinking of planning it out and having my buddy help me, he is a good welder/fabricator. actually this is my first buggy, its a crap load of fun, if i got a wheeler could i make it with reverse? i really want this to be as profesional as possible. i really dont care too much about reverse but it would be nice.
|
|
#8
03-05-2010, 01:05 PM
|
||||
|
||||
|
yea, that's the down side of using a bike engine. i don't know how or if it would work but if you can find a quad that was equiped with reverse you may be able to get that to work. might have to use the quad rear though....
__________________
07 HH250SS UNI HIT CLUTCH DR. PULLEY VARIATOR RED MAIN 17g ROLLERS 12T/45T SPROCKETS IRIDIUM PLUG HP CDI & COIL LED LIGHTS ASW CARBIDE UNI 12g SLIDERS RED MAIN 39T SPROCKET (coming soon) |
|
#9
03-05-2010, 08:20 PM
|
||||
|
||||
|
i been lookin at my quantum, and when the motor goes its going to get prob a 250 big red motor, most have electric start,reverse and some have hi and low, wont have the snap of d.b. but be nice to have five gears, key start and rev
__________________
2009 asw Quantum 150cc 2002 Carter bros 6.5 horse tecumpcy |
|
#10
03-05-2010, 10:37 PM
|
||||
|
||||
|
after winter look at used snowmobiles
some have reverse on them and elec start after cold weather leaves they get cheaper olderthan
__________________
olderthan 2008 tomberline punisher 1500 spring 12g sliders 30mm cv pumper carb uni filter no rev cdi polaris xlt snowmobile shocks for front w/550 magnum springs & blaster fronts on rear and another buggy built working on mods gk-13 white spring 17 gram sliders so far |
|
#11
03-07-2010, 10:12 PM
|
||||
|
||||
|
Find a polaris chain driven engine or a can am chain driven. They use a right side drive (just like the buggy) and have reverse built in!
|
|
#12
03-09-2010, 09:24 AM
|
|||
|
|||
|
how much would a polaris or can am cost do u think??? just a ball park. i had a polaris trail blazer 250 we had for years too bad i sold it like 2 years ago
|
|
#13
05-15-2010, 12:36 PM
|
|||
|
|||
|
Hi again all, I have decide to upgrade my engine, will be searching the local used parts graveyards, thanks to all of your posts I know what to look for. I will pull the GY6 150 and I hope to find a 250cc to replace it. Will the Helix frame take it?
|
|
#14
05-16-2010, 01:13 PM
|
||||
|
||||
|
I think it will. Be sure to post your progress in the Frankenbuggy forum.
|
|
|
