cn250 into a baja150..harness

[akingjeeper1]

Hi.
Just put a cn250 engine in my baja 150. The cn250 has three yellow wires, a blue and a green. I believe the green is ground, the blue is the trigger wire to the cdi, And the yellow wires go to the regulator. If this is correct, where does the a/c power for the cdi come from? Can I use one of the yellow wires? I appreciate any help I can get.

[liduno]

Do you have the regulator rectifier for the CN250? Wouldn't the cdi be powered from the battery through the ignition switch?

[SYCARMS]

It looks like you are using the 150 wiring harness. If so the 250 will be wired differently. You will need to get a schematic for the 250 electrical.

[akingjeeper1]

Yes I am using the stock harness off the 150. Understandable the cn250 would be wired different. But what carts came with the cn250? I think roketa gk 06 did, but that harness diagram off their site wasn't that great. Any other options?

[liduno]

I posted a cf250 wiring diagram in your other thread, no help there?

[akingjeeper1]

It didn't show (or at least I can't tell) where the cdi gets its ac power looking at that. But I do appreciate the help.