Best mods for a gy6 150cc

[buggykid]

Hey i'm wanting to get the most out of my cvt. What items should i buy and out in there that would be a quick and cheap fix? Looking for more around a little bit of both speed but some good torque. Does anybody know the lightest pair of rollers that still oush the variator out all the way?

[BuggyMaster]

For us, we went with a set of 13g sliders and found those to be to our liking. It really depends on what you are going to do with it. We do a lot of riding at the top end so too light and we lost a lot of that. Cheap bang for the buck would be a uni filter, and variator / clutch mods.

[olderthan]

trying to stay on top of speed 13 sliders-uni filter jets open exhaust some
you will still have low end

[buggykid]

Thanks for the info I really made a mistake about a month ago I bought some 16gm sliders and everybody on these forums say that those are way to heavy and I can agree because since it's so a high ratio you really cant let off the throttle or else it will have trouble getting back up in rpms. I'm defiinatly going to get a UNI filter with a biggier jet and some 12gm sliders and mabey a 1500 spring.

[olderthan]

12 sliders are equal to 10 rollers great for torque with a 1500 spring but you will lose some top end

[buggykid]

well i will just try mabey a 11 or12 roller and a 150cc spring. I found a website that told me what each weight roller would do to performance. and 11 and 12 are an all around type which is kind of what I want now.

[olderthan]

11 or 12 rollers will be better than 16 sliders which are equal to 14 rollers way to much
for a gy6-you will like the 1500 spring also