BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum

Go Back   BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum > Technical Discussions > 150cc GY6 and Under Engine Tech

150cc GY6 and Under Engine Tech GY6 and Smaller Technical Discussion Forum

 
 
Thread Tools
  #1  
Old 05-01-2016, 11:25 PM
Twolanedrift Twolanedrift is offline
Lurker
 

Join Date: May 2016
Location: Dallas Texas
Posts: 4
Default ID Help

Gents! I could really use some help ID'ing my barn find Go Kart. The owner wasn't sure where or when it was purchased exactly by her son. I am including the only marking I can find. The 150CC motor has ASW on the side. I am in the processing of restoring and I need a new shifter assembly. Any help on where to get parts would be GREATLY appreciated.

Attachment 8665

Attachment 8666

Attachment 8667
  #2  
Old 05-02-2016, 12:42 AM
Traxman Traxman is offline
Lurker
 

Join Date: Nov 2015
Posts: 24
Default

Look up carbide 150 shifter of google.
__________________
2014 Trailmaster 150, Dr pully variator, gtc clutch, cai, orange coil, 20" lightbar, 6"pods, 61mm BBK,yellow clutch spring, glasspack exhaust...to be continued
  #3  
Old 05-02-2016, 11:55 AM
SYCARMS's Avatar
SYCARMS SYCARMS is offline
Supporting Vendor
 

Join Date: Sep 2009
Location: Senatobia, Mississippi
Posts: 3,375
Default

I don't remember which year, but Manco was purchased by ASW (American Sport Works). The fox was the old Manco buggy which ASW kept for a few years before redesign to the Carbide.Your attachment 8667 I assume is the shift control that mounts to the shift lever on trans and has 2 cables running to it. I have a good stock of ASW parts but would need a bit more information. You can give me a call @ 662-301-1563 and I can get you what you need.
  #4  
Old 05-02-2016, 10:50 PM
Twolanedrift Twolanedrift is offline
Lurker
 

Join Date: May 2016
Location: Dallas Texas
Posts: 4
Default

Quote:
Originally Posted by Traxman View Post
Look up carbide 150 shifter of google.
\

Thanks Traxman, I found it on Ebay and ordered one this morning!
  #5  
Old 05-02-2016, 10:53 PM
Twolanedrift Twolanedrift is offline
Lurker
 

Join Date: May 2016
Location: Dallas Texas
Posts: 4
Default

Quote:
Originally Posted by SYCARMS View Post
I don't remember which year, but Manco was purchased by ASW (American Sport Works). The fox was the old Manco buggy which ASW kept for a few years before redesign to the Carbide.Your attachment 8667 I assume is the shift control that mounts to the shift lever on trans and has 2 cables running to it. I have a good stock of ASW parts but would need a bit more information. You can give me a call @ 662-301-1563 and I can get you what you need.
Thanks SYCARMS. You are now in my phone. I have other pieces I need so I will give you a call. Overall after replacing the fuel lines it actually runs really well for sitting in a barn for two years. Just needs replacement parts here and there. Thanks so much for the help!
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:31 PM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.