58.5mm 160cc Head with under 50 miles

[SLESTAK75]

I'm considering getting the performance head from Tom at Syc. This will leave me with my 58.5mm 160cc head with less than 50 miles on it. Anyone interested??? Make me an offer. It's the a type head with 54mm bolt holes center to center. 28mm intake valve 25mm port, 23mm exhaust valve 24mm port, and 58.5 mm combustion chamber supposed to give you 160cc combustion chamber. Make an offer by PM.

[Johnny 5]

I would keep the head because if you bend a valve or have a problem you will have a good back up.

[bear]

I agree with "J5" I've only had the 150's a short time, but I've had the 110 for over 3 years now and have built up a nice little cache of parts for it, even have a complete spare clutch assy. ready to drop in on a moments notice! this is good to have on those semi-auto's trust me! anyway's I cant wait to build up a nice parts supply to mess with on my 150's!

[SLESTAK75]

I'm trying to decide whether to have my stock head ported polished and milled of get the large valve head done the same way. I figured if this one sold then that would be it. I wouldn't mind keeping it. We ll just see what happens.

[SLESTAK75]

Bump