|
|
|
|||||||
| Other tech issues For all other technical issues. Think frame, suspension, steering, brakes, etc |
 |
|
|
Thread Tools |
|
#1
01-12-2012, 09:43 AM
|
|||
|
|||
5/8 Grade 8 Bolts... Where To Buy Them?
My GX150 has the Gen 3 spindles which are doing well so far. The only problem is I just upgraded to 20x7x8 tires and there is barely enough room for the axle nut to stay on because the hubs are wide. I am looking to grind off the original 5/8 bolt, drill all the way through and attach a much longer grade 8 bolt. Only problem is that I can only find 5/8" grade 8 bolts in 6 inches or less and I need it to run through the spindle, like the BD spindles. Where can I find a bolt longer than the 6"?
|
|
#2
01-12-2012, 12:25 PM
|
||||
|
||||
|
bought my 7-1/2" ones at Lowes- Fastenal(sp?) is another good place
|
|
#6
01-17-2012, 09:40 AM
|
|||
|
|||
|
YAY!!! Went to Tractor Supply and they have a HUGE selection of Grade 8 bolts. I have one spindle pretty much completed. I was able to grind off the bolt and smooth out the old bolt head and drill right through it all the way through the spindle. I figure there is no possible way that is going to break. I still have to weld the new bolt on the back side of the spindle but it is very solid as it is. Need to find a friend with a welder.
|
|
|
|
