BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum

Go Back   BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum > Technical Discussions > 150cc GY6 and Under Engine Tech

150cc GY6 and Under Engine Tech GY6 and Smaller Technical Discussion Forum

Reply
 
Thread Tools
  #1  
Old 09-05-2017, 10:11 PM
fan4chevy fan4chevy is offline
Contributor
 

Join Date: Sep 2016
Posts: 116
Default Turbo Charger For GY6 125 to 150

Hi all,

Looking for the most possible power without destroying this tiny little cc engine.

Anyone ever tried turbo chargers?

Anyone know much of this kit? http://www.ecotrons.com/products/sma..._turbocharger/

Charles
__________________
Buggy 1
150cc Buggy
A12 Cam, 12g Sliders, Ban Jing Bell, NCY Green Clutch, 24mm Carb, 115mm Koso variator ramp, redneck intake, uni filter, straight through exhaust.

Guang Max 150
All stock but to be like Buggy 1 with all koso cvt.

Roketa 150
Complete tear down building port/polished 61mm NCY head, 62mm cylinder, A12 Cam, 28mm carb, straight through exhaust, 8 pole stator, possibly 2.5 stroker, painting frame, adding plastic including doors and rzr seats.
Reply With Quote
  #2  
Old 09-06-2017, 01:18 AM
neo71665 neo71665 is offline
Lurker
 

Join Date: Jun 2017
Posts: 22
Default

Its been done but these little things don't put out enough air to spin the smallest turbos up. You'll basically be just adding an exhaust restriction that looks cool.

Another problem I have is the oiling systems on these things is so low psi it'll never keep a turbo oiled properly.

I also looked into the A.I.R. pump "supercharging" and the parasitic draw will be about as much as the added power pretty much leading it to equal out. Again leaving it to just looking pretty.

Once you have tuned a gy6 to all the commercially produced mods it boils down to there is no replacement for displacement.
Reply With Quote
  #3  
Old 09-06-2017, 11:58 AM
fan4chevy fan4chevy is offline
Contributor
 

Join Date: Sep 2016
Posts: 116
Default

Sounds about right.

I am installing the 61mm big bore that you have to bore in by ncy. Sounds like that is the biggest reliable bore and all the reliable big bores need to be bored for.

So I guess that is where I must end it.
__________________
Buggy 1
150cc Buggy
A12 Cam, 12g Sliders, Ban Jing Bell, NCY Green Clutch, 24mm Carb, 115mm Koso variator ramp, redneck intake, uni filter, straight through exhaust.

Guang Max 150
All stock but to be like Buggy 1 with all koso cvt.

Roketa 150
Complete tear down building port/polished 61mm NCY head, 62mm cylinder, A12 Cam, 28mm carb, straight through exhaust, 8 pole stator, possibly 2.5 stroker, painting frame, adding plastic including doors and rzr seats.
Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:49 PM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.