|
|
|
|||||||
| 250cc and Above Engine Tech Technical Discussion Forum for 250cc and up Engines |
|
|
Thread Tools |
|
#1
08-16-2009, 07:05 PM
|
||||
|
||||
CN250 jetting?
I was very surprised when I opened up the carb on the Coolster and found a 110 main jet in it. I put a 114 in it that I had from one of the Helix buggies. I wonder what the though process is in using such a small jet in a 250. Maybe that's how they get the C.A.R.B. approval on it.
|
|
#2
08-16-2009, 09:03 PM
|
||||
|
||||
|
hmmm that weird
__________________
MY HELIX -20' maxxis tires -1 1/2in.UNI air filter -gutted exaust -extended lugs -headlights -reflectors -my stickers -adjusted suspension -ground out hubs (to fit on the tires) helix 150 |
|
#3
08-24-2009, 06:08 PM
|
||||
|
||||
|
My Buggy (CF Moto) had a 108 Main jet
__________________
Thanks, PatNY 2008 HammerHead Super Sport 250cc 32mm Performance Pumper Carburetor Uni Filter Hammerhead Performance Exhaust 145 Main Jet 40 Pilot Jet 1/4 Fuel line Black MRP CDI MRP Performance Coil NGK Iridium Plug Dr.Pulley HIT Clutch White MRP Main Torque Spring Dr.Pulley Variator Dr.Pulley 19gr. Sliders Kenda Front Max 20 x 7-8 Interco Swamp Lite 22 x 11-10 |
|
#4
08-24-2009, 06:11 PM
|
||||
|
||||
|
was it running lean?
__________________
MY HELIX -20' maxxis tires -1 1/2in.UNI air filter -gutted exaust -extended lugs -headlights -reflectors -my stickers -adjusted suspension -ground out hubs (to fit on the tires) helix 150 |
|
#5
08-24-2009, 06:31 PM
|
||||
|
||||
|
No, that's when everything was stock. No mods
__________________
Thanks, PatNY 2008 HammerHead Super Sport 250cc 32mm Performance Pumper Carburetor Uni Filter Hammerhead Performance Exhaust 145 Main Jet 40 Pilot Jet 1/4 Fuel line Black MRP CDI MRP Performance Coil NGK Iridium Plug Dr.Pulley HIT Clutch White MRP Main Torque Spring Dr.Pulley Variator Dr.Pulley 19gr. Sliders Kenda Front Max 20 x 7-8 Interco Swamp Lite 22 x 11-10 |
|
#6
08-24-2009, 06:59 PM
|
||||
|
||||
|
cool!!!
__________________
MY HELIX -20' maxxis tires -1 1/2in.UNI air filter -gutted exaust -extended lugs -headlights -reflectors -my stickers -adjusted suspension -ground out hubs (to fit on the tires) helix 150 |
|
#7
08-01-2010, 02:10 PM
|
||||
|
||||
|
hey patny im in newburgh ny is your buggy running rich with the set up in the carb?
|
|
#9
08-10-2010, 10:35 AM
|
||||
|
||||
|
to small
do any mods will run lean
__________________
olderthan 2008 tomberline punisher 1500 spring 12g sliders 30mm cv pumper carb uni filter no rev cdi polaris xlt snowmobile shocks for front w/550 magnum springs & blaster fronts on rear and another buggy built working on mods gk-13 white spring 17 gram sliders so far |
|
#10
08-10-2010, 05:25 PM
|
|||
|
|||
|
I've heard from a few folks that they put small jets in for emissions. Dont know if thats true but it's a though.
|
|
#11
08-10-2010, 08:07 PM
|
||||
|
||||
|
Too lean of a mixture puts out pollutants as well. To get past epa fuel has to be burned as completely as possible. Unburnt fuel puts out hydrocarbons , but too lean mixture puts out another polutant for which I forget the name. TOM
|
|
#12
08-10-2010, 09:48 PM
|
|||
|
|||
|
If you dont remember the name then it dont count Tom. LOL
|
|
|
