|
|
|
|||||||
| Parts For Sale / Wanted All member parts for sale go here regardless of type. |
 |
|
|
Thread Tools |
|
#1
04-21-2010, 09:27 PM
|
||||
|
||||
rear wheels for my HH250SS
i'm looking for an extra set of rear wheels for my hh250. i would prefer aluminum but steel would work. i need a 4/137 bolt pattern and they need to be 10x8 or 10x9 wheels with a back side offset of 3 to 5 inches. if you have a set with good mud tires that even better. let me know what you have.
thanks.
__________________
07 HH250SS UNI HIT CLUTCH DR. PULLEY VARIATOR RED MAIN 17g ROLLERS 12T/45T SPROCKETS IRIDIUM PLUG HP CDI & COIL LED LIGHTS ASW CARBIDE UNI 12g SLIDERS RED MAIN 39T SPROCKET (coming soon) 
|
|
#2
04-24-2010, 12:15 PM
|
||||
|
||||
|
well, since i got soooooo many responses on my first post.....
 i can also use the following wheels: *need to be 4/137 pattern, 10" diameter 7",8" or 9" wide rim with an inside offset of at least 3" aluminum or steel anything?.........
__________________
07 HH250SS UNI HIT CLUTCH DR. PULLEY VARIATOR RED MAIN 17g ROLLERS 12T/45T SPROCKETS IRIDIUM PLUG HP CDI & COIL LED LIGHTS ASW CARBIDE UNI 12g SLIDERS RED MAIN 39T SPROCKET (coming soon)
|
|
#3
04-24-2010, 01:04 PM
|
|||
|
|||
|
Are you going to the buggy bash? If so I might have a set of rears for you. I have a set from my joyner with stock tires and a set with 19in hole shots on them. If you would have asked a month ago I would have shipped them but it's hard to find that kinda time in the spring and summer
|
|
#4
04-24-2010, 03:30 PM
|
||||
|
||||
|
i know what you mean chuck, especially for you in your line of work. i have some tires lined up but need the extra rims. if you decide to get rid of any of them let me know and send me the spec's on them(offset & width).....and maybe some pics. i don't even know where the next buggy bash is. usually they are too far for me to drive. if and when you want to sell the wheels let me know and i can create a call tag for pick up so you don't have to mess with shipping. i have an account thru work.
__________________
07 HH250SS UNI HIT CLUTCH DR. PULLEY VARIATOR RED MAIN 17g ROLLERS 12T/45T SPROCKETS IRIDIUM PLUG HP CDI & COIL LED LIGHTS ASW CARBIDE UNI 12g SLIDERS RED MAIN 39T SPROCKET (coming soon)
|
|
#5
04-24-2010, 04:28 PM
|
|||
|
|||
|
The next bash is in st. joes. I'll see if I can get you some specs. I dont have a problem getting rid of a set, it's just the time involved. If you can have them picked up though that would solve that
|
|
#6
04-24-2010, 05:02 PM
|
||||
|
||||
|
thanks chuck, i appreciate it.
__________________
07 HH250SS UNI HIT CLUTCH DR. PULLEY VARIATOR RED MAIN 17g ROLLERS 12T/45T SPROCKETS IRIDIUM PLUG HP CDI & COIL LED LIGHTS ASW CARBIDE UNI 12g SLIDERS RED MAIN 39T SPROCKET (coming soon)
|
|
|
|
