BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum

Go Back   BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum > Technical Discussions > Go Kart Engine and Torque Converter Tech

Go Kart Engine and Torque Converter Tech Forum for discussing go kart engines and torque converters (Briggs, Tecumseh, Suburu, Comet etc)

 
 
Thread Tools
  #1  
Old 05-24-2013, 04:57 PM
bigjohn816 bigjohn816 is offline
Lurker
 

Join Date: May 2013
Location: missouri
Posts: 1
Default comet 40 torque converter

I have a Brister go cart with a 13 hp Tecumseh and a comet 40 torque converter with a 203788a comet belt. According to mfg supply that is the correct belt for this driver, driven setup. My problem is that my driver will allow the roller cams to roll off track and then the torque converter will not retract and allow the cart to stop without wearing down the belt or stalling the cart. I replaced the driver because I thought it was just worn out with a brand new driver from Bullet Line. After about 4 to 5 hours of use on flat ground and in grass the new driver has now stopped retracting completely also. I have not opened the new one up because of warranty issues but could there be something else happening to cause both clutches to the same thing or do I have a defective driver? I do have a new belt with the new driver on the cart. I was told by the company I purchased it from that I need to lubricate it with graphite dry lube.
Any suggestions?
  #2  
Old 05-24-2013, 07:34 PM
2SlickNick's Avatar
2SlickNick 2SlickNick is offline
Senior Member
 

Join Date: Mar 2013
Location: Gilbert, AZ.
Posts: 1,268
Default

yes, open it up and lubricated it with dry grahite lube.

http://www.youtube.com/watch?v=C9yPHtfJO9w

http://www.*****************/trouble.htm

These helped me,
__________________
Growing old is mandatory
Growing up is optional
https://www.youtube.com/watch?v=NEXoa-8d7qE
  #3  
Old 05-25-2013, 05:30 AM
x-bird's Avatar
x-bird x-bird is offline
Power User
 

Join Date: Oct 2011
Location: Penciltucky
Posts: 2,518
Default

are you sure the driven and driven are a correct match to each other and not a mix of 30 and 40 series?
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:26 PM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.