BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum

Go Back   BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum > General Mini Buggy and Go Kart Forums > Mini Buggy General Discussion

Mini Buggy General Discussion General Discussion forum for Mini Buggies. (American Sportworks, HammerHead, Carter, etc)

 
 
Thread Tools
  #1  
Old 02-07-2018, 02:24 PM
Fink Fink is offline
Lurker
 

Join Date: Dec 2017
Posts: 21
Default Finks Spiderbox Build

Picked up a Spiderbox a few months ago and am doing a 420cc swap on it. My kids have Go Karts and I wanted one that I could ride around in with my youngest daughter so her and I are building this one for us. Sons is a Streaker 8 and my oldest daughter has the Yerf-dog 3002. Cut up the Swing arm. The 150cc engine that came with it was is bad shape and the 420cc was on sale. Going to go with a heavier shock in the rear if anyone has suggestions on what a good shock for the rear is that will give me some extra lift would be awesome. I did a quick mockup of the engine yesterday and today I tore down the front bulkhead to get ready for all the new BDX parts that I ordered. Getting the works. going with a 22X11-8's in the rear and a 19x7-8's in the front. Also getting the Steering rack sent out for extra teeth cut into the rack from buggy depot.

This Go Karts for My 6 year old and me to keep up with my older 2 kids, She wants to paint it red with flames(we'll see how that goes). I'm just enjoying building something playing with the welder.

parts on order are:
Deluxe Flexpruf Steel Step-Down Axle - 1" to 3/4" (Standard) Size*: 42''
#40 Sprocket 60T with 1" bore
#40 Sprocket 9T with 3/4" bore
H93262W #40 Chain (66 Links) x2
401640 Master Link Pitch: #40 (401640) x2
400243 Sprocket / Brake Hub with 3-1/8" Bolt Pattern Bore Size: 1'' Bore
K260050 Galvanize 4 x 4 Wheel Hub (1" Bore) x2
HUB, FRONT WHEEL X2
A9037 Billet Aluminum Wheel Hub for Metric Rim 4x110mm rear hubs (1" Bore)
4x BDX HD Ball Joints
1x BDX HD Reinforced Front Bulkhead w/ 8" Bolts
2x BDX HD Reinforced Upper A-Arms 3rd-Gen
2x BDX HD Reinforced Lower A-Arms
2x BDX HD Reinforced Spindles 3rd-Gen
BDX Alignment Standoffs
3" Lift Kit and shocks!!!
2x New Tie Rod Ends
Attached Images
File Type: jpg 2017-12-08 20.56.56.jpg (94.8 KB, 47 views)
File Type: jpg 2017-12-09 09.14.21-1.jpg (101.5 KB, 42 views)
File Type: jpg 2017-12-02 15.09.02-11.jpg (99.7 KB, 39 views)
File Type: jpg 2018-02-03 15.49.34 HDR.jpg (95.7 KB, 38 views)
File Type: jpg 2018-02-03 16.37.24 HDR.jpg (95.2 KB, 54 views)
File Type: jpg 2018-02-03 16.38.27.jpg (99.1 KB, 38 views)
File Type: jpg 2018-02-04 14.51.01.jpg (88.7 KB, 30 views)
File Type: jpg 2018-02-04 14.51.08.jpg (88.2 KB, 29 views)

Last edited by Fink; 02-18-2018 at 04:04 PM.
  #2  
Old 02-13-2018, 10:02 PM
jmansracerocket's Avatar
jmansracerocket jmansracerocket is offline
Senior Member
 

Join Date: Apr 2012
Location: ny, long island
Posts: 1,342
Default

Cool build, wonder how that 420 will perform.
__________________
Hammer head Single seater know as herbie
under construction

Aluminum fuel tank, aluminum wheels, custom fuel/cargo rack, entire rewire, trail tech vapor, ported big valve head, a12camshaft, 12 gram sliders, straight intake, kirkey wide seat, front end extension. 4 point harness, welded cage. Hammerhead exhaust.



Blade Single Seater Restore
welded cage, engine build, new wiring harness/electric box, spun aluminum fuel tank.
  #3  
Old 02-17-2018, 09:50 PM
Fink Fink is offline
Lurker
 

Join Date: Dec 2017
Posts: 21
Default

I have high hopes for it. Not looking to a speed machine. Pit vehicle for when we go to the track and something that can pull my dads mustang around the track during test and tunes. Just waiting on some warmer weather so I can start working in the garage again.
  #4  
Old 02-26-2018, 06:45 PM
Fink Fink is offline
Lurker
 

Join Date: Dec 2017
Posts: 21
Thumbs up

Got back from vacation and cranked away all day on the swing arm while I'm waiting on parts from BDX and Gopowersports. Made some pretty good progress and am happy with the results so far. Can't wait to finish this one up because I think my next buggy is going to have a motorcycle engine. 250 ninja or a GS500. Having a blast fabricating this stuff
Attached Images
File Type: jpg 2018-02-26 17.16.33.jpg (94.2 KB, 33 views)
File Type: jpg 2018-02-26 17.16.59.jpg (91.4 KB, 31 views)
File Type: jpg 2018-02-26 17.17.17.jpg (95.2 KB, 29 views)
File Type: jpg 2018-02-26 17.17.31.jpg (96.0 KB, 33 views)
File Type: jpg 2018-02-26 13.58.39.jpg (96.4 KB, 30 views)
  #5  
Old 03-01-2018, 06:46 AM
Fink Fink is offline
Lurker
 

Join Date: Dec 2017
Posts: 21
Default

Got the swing arm 90% completed. Got new bearings from Gopowersports and 2 pillow bearings for supporting the middle of the axle under the engine. New brake master cylinder supply line are ready to install. New wheels and tires are arriving today. The Rears are only temporary because I'm going to a larger size, I got 18x9.5x8's rears and fronts of 19x8x7 new setup will be 22x10x10 and 19x8x7. Old new fronts will go on my daughters Kart. Which I'm still trying to upgrade to another spiderbox or hammerhead 150. really not a fan of the 3002 model.

I also posted up a weld picture because... Why not. I paid $78 for this welder from Harbor freight and for a complete welding noob I think I'm doing pretty dam good. Although Before my construction accident I welded plastic pipe so I'm not a complete noob.
Attached Images
File Type: jpg 2018-02-26 18.34.17.jpg (96.7 KB, 25 views)
File Type: jpg 2018-02-27 16.11.44.jpg (97.3 KB, 23 views)
File Type: jpg 2018-02-27 15.58.28.jpg (85.6 KB, 29 views)
  #6  
Old 03-01-2018, 05:17 PM
Fink Fink is offline
Lurker
 

Join Date: Dec 2017
Posts: 21
Default

Got the tires in today. The Rears are alot smaller than I thought they would be so I'm probably going to swap them on my sons go kart and get a set of 22x10x10s. Just waiting on the BDX front end stuff and I finish this puppy up. Going to weld in gussets and paint the frame this sunday.
Attached Images
File Type: jpg 2018-03-01 15.44.52.jpg (97.5 KB, 31 views)
File Type: jpg 2018-03-01 15.37.37 HDR.jpg (96.3 KB, 28 views)
File Type: jpg 2018-03-01 15.31.29 HDR.jpg (97.3 KB, 39 views)
  #7  
Old 03-07-2018, 04:45 PM
Fink Fink is offline
Lurker
 

Join Date: Dec 2017
Posts: 21
Default

Got an update on my front end and I can't wait to install this monster.
Attached Images
File Type: jpg 2018-03-11 10.45.56.jpg (99.1 KB, 25 views)
File Type: jpg 2018-03-11 10.46.01.jpg (98.7 KB, 21 views)

Last edited by Fink; 03-16-2018 at 11:42 PM.
  #8  
Old 03-29-2018, 02:43 PM
Fink Fink is offline
Lurker
 

Join Date: Dec 2017
Posts: 21
Default

quick up date. Got the BDX front end installed. Just waiting on the Wheel spacers and modified Steering rack and the front end will be done. In other news I Modified my sons 3002 from a 2 seater to a 1 seater.





Attached Images
File Type: jpg bdx1.jpg (98.1 KB, 44 views)
File Type: jpg bdx2.jpg (97.0 KB, 46 views)
File Type: jpg bdx3.jpg (97.3 KB, 45 views)
File Type: jpg 2018-03-26 18.36.28-1.jpg (98.1 KB, 46 views)
File Type: jpg 2018-03-28 13.05.03.jpg (98.8 KB, 47 views)

Last edited by Fink; 03-29-2018 at 02:45 PM.
  #9  
Old 05-17-2018, 08:02 PM
Fink Fink is offline
Lurker
 

Join Date: Dec 2017
Posts: 21
Default

The 420 performs amazing for the record. Got a ton done just needs paint now. Had it out in the mud and offroading. It's a blast.

https://www.youtube.com/watch?v=J_SACY_U6RU

https://www.youtube.com/watch?v=RllbZPln5H4&t

https://www.youtube.com/watch?v=7bP71mpXP3U
Attached Images
File Type: jpg 2018-04-20 14.41.22.jpg (97.7 KB, 13 views)
File Type: jpg 2018-04-20 15.21.47.jpg (97.5 KB, 13 views)
File Type: jpg 2018-05-17 16.35.45 HDR.jpg (96.4 KB, 11 views)
File Type: jpg 2018-05-17 16.36.38.jpg (90.7 KB, 12 views)
  #10  
Old 05-17-2018, 09:11 PM
OLDKID's Avatar
OLDKID OLDKID is offline
Contributor
 

Join Date: Nov 2014
Location: Western N.Y.
Posts: 457
Cool

The Spiderbox Looks HOT & SNOTTY ! SWEET BUILD . Awesome video , Love see'n off-road stuff in action ! BUT ...... Being the Old Grumpy Grandpa I Am .... Gotta stress it . Can't help it , Almost lost My Wife of 40 years in 2012 to a massive head trauma injury .... on a minibike ... 3 minute ride ... NO HELMET ! You love you're family , they got helmets . Love them more and where Yours . They wouldn't be able to enjoy without You . Sorry if I sound offensive , not My intention . But I've been to the other side / Not Fun .
__________________
2011 BMS KING COBRA 150 Sold
YERF DOG SPIDERBOX's Sold
YERF DOG 3203's. Sold
MANCO SILVER FOX. Sold
2009 POLARIS 500 HO SPORTSMAN 4X4
2002 POLARIS 500 HO SPORTSMAN 4X4
2000 POLARIS MAGNUM 2X4
HALF A DOZEN CHEVY 4X4's
NEED-MO-BUGGY
  #11  
Old 05-21-2018, 07:57 AM
Fink Fink is offline
Lurker
 

Join Date: Dec 2017
Posts: 21
Default

Quote:
Originally Posted by OLDKID View Post
The Spiderbox Looks HOT & SNOTTY ! SWEET BUILD . Awesome video , Love see'n off-road stuff in action ! BUT ...... Being the Old Grumpy Grandpa I Am .... Gotta stress it . Can't help it , Almost lost My Wife of 40 years in 2012 to a massive head trauma injury .... on a minibike ... 3 minute ride ... NO HELMET ! You love you're family , they got helmets . Love them more and where Yours . They wouldn't be able to enjoy without You . Sorry if I sound offensive , not My intention . But I've been to the other side / Not Fun .

Helmet is here, and I installed 4 point harnesses. Thanks for your concern and its been fixed. You don't sound Offensive you sound like someone that cares and we need more of that in today's society so thank you. Next time you see a video you will see me with a helmet and a harness

Last edited by Fink; 05-21-2018 at 08:00 AM.
  #12  
Old 05-21-2018, 08:03 AM
Fink Fink is offline
Lurker
 

Join Date: Dec 2017
Posts: 21
Default

Added Harnesses and welded in the brackets. Started slowly painting what I could before i have to tear it apart to get everything painted. Then I have to tear down the Hammerhead and strip and paint that.



Attached Images
File Type: jpg Paint2.jpg (93.6 KB, 36 views)
File Type: jpg paint.jpg (93.3 KB, 37 views)
File Type: jpg paint3.jpg (97.5 KB, 36 views)
File Type: jpg 2018-05-17 16.34.48 HDR.jpg (97.1 KB, 38 views)

Last edited by Fink; 05-21-2018 at 08:10 AM.
  #13  
Old 05-21-2018, 08:33 PM
OLDKID's Avatar
OLDKID OLDKID is offline
Contributor
 

Join Date: Nov 2014
Location: Western N.Y.
Posts: 457
Cool

Bad To The Bone !
__________________
2011 BMS KING COBRA 150 Sold
YERF DOG SPIDERBOX's Sold
YERF DOG 3203's. Sold
MANCO SILVER FOX. Sold
2009 POLARIS 500 HO SPORTSMAN 4X4
2002 POLARIS 500 HO SPORTSMAN 4X4
2000 POLARIS MAGNUM 2X4
HALF A DOZEN CHEVY 4X4's
NEED-MO-BUGGY
  #14  
Old 05-21-2018, 08:58 PM
Fink Fink is offline
Lurker
 

Join Date: Dec 2017
Posts: 21
Default

Getting there. Can't wait to be done with Paint.


Attached Images
File Type: jpg paint4.jpg (96.6 KB, 35 views)
File Type: jpg paint5.jpg (98.6 KB, 33 views)
File Type: jpg Paint6.jpg (96.4 KB, 32 views)
  #15  
Old 05-23-2018, 08:09 AM
Fink Fink is offline
Lurker
 

Join Date: Dec 2017
Posts: 21
Default

Paint is done!... For one of them now I get to pain the Hammerhead which looks Infinitly harder with all the wiring harnesses and cables.
Daughter is happy though




Attached Images
File Type: jpg 2018-05-22 16.51.00.jpg (92.2 KB, 27 views)
File Type: jpg 2018-05-22 16.47.48 HDR.jpg (96.6 KB, 30 views)
File Type: jpg 2018-05-22 16.46.58.jpg (95.3 KB, 30 views)
File Type: jpg 2018-05-22 16.46.42.jpg (94.0 KB, 29 views)
File Type: jpg 2018-05-22 16.45.42.jpg (93.0 KB, 29 views)
  #16  
Old 05-23-2018, 01:48 PM
Fink Fink is offline
Lurker
 

Join Date: Dec 2017
Posts: 21
Default

Nearly 6 months later it’s complete for my first build. Learning welding in the fly and not knowing anything about Go Karts I’d say I did alright. And am now addicted.







Attached Images
File Type: jpg 2018-05-23 10.47.56.jpg (97.3 KB, 29 views)
File Type: jpg 2018-05-23 10.47.48.jpg (96.9 KB, 27 views)
File Type: jpg 2018-05-23 10.47.34.jpg (98.0 KB, 27 views)
File Type: jpg 2018-05-23 10.47.27.jpg (97.8 KB, 28 views)
File Type: jpg 2018-05-23 10.47.16.jpg (98.1 KB, 24 views)
File Type: jpg 2018-05-23 10.47.08.jpg (97.4 KB, 23 views)
File Type: jpg 2018-05-23 10.46.59.jpg (97.1 KB, 25 views)
File Type: jpg 2018-05-23 10.46.38 HDR.jpg (97.5 KB, 25 views)

Last edited by Fink; 05-23-2018 at 01:51 PM.
  #17  
Old 05-23-2018, 01:55 PM
Fink Fink is offline
Lurker
 

Join Date: Dec 2017
Posts: 21
Default

Before December 8th 2017

After May 23rd 2018
Attached Images
File Type: jpg 2017-12-08 20.56.56.jpg (94.8 KB, 27 views)
File Type: jpg 2018-05-23 10.47.08.jpg (97.4 KB, 27 views)
  #18  
Old 07-11-2018, 09:28 AM
John316 John316 is offline
Lurker
 

Join Date: Jul 2018
Posts: 5
Default

Very nice! How does this animal perform?
Does it have some low end torque?
What is your estimated top speed?
I'm re building a busted spiderbox and using the same gears and tires.
  #19  
Old 07-11-2018, 05:53 PM
Fink Fink is offline
Lurker
 

Join Date: Dec 2017
Posts: 21
Default

Lots of low end torque great for hills and mud. Flat out it does about 33-35mph. The upgraded steering rack makes it much more manageable for tighter turns.
https://www.youtube.com/watch?v=-BWuvuG_TP8

Last edited by Fink; 07-11-2018 at 05:57 PM.
  #20  
Old 07-12-2018, 08:50 AM
John316 John316 is offline
Lurker
 

Join Date: Jul 2018
Posts: 5
Default

That sound pretty good, I wouldnt want to go much faster than that. Where did. You get an upgraded steering rack? I was thinking of having some more grooves cut in at a machine shop.
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:27 PM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.