BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum

Go Back   BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum > Technical Discussions > Electrical Tech

Electrical Tech General Tech for Electrical issues not related to specific engines (Lights etc)

Reply
 
Thread Tools
  #1  
Old 03-23-2015, 12:17 PM
rookiebuggy rookiebuggy is offline
Lurker
 

Join Date: Feb 2015
Posts: 10
Default How to test Solenoid

Installed new fully charged battery, new starter. Before installing the starter it click (I think it was the solenoid clicking) now it doesn't click.

Also, if it's possible... I need a diagram of the fuel lines from the Carb. To where they're supposed to go to... I know where the gas line goes, my question is really where the air vacuum line go connection to? Maybe one goes to the coolet hose? Picture's would help a lot! It's a CN250

Thanks!!
Reply With Quote
  #2  
Old 03-23-2015, 05:21 PM
zman007007's Avatar
zman007007 zman007007 is offline
Senior Member
 

Join Date: Dec 2012
Location: Gray Court,S.C.
Posts: 1,476
Default try this

welcome rookie, I don't have a diagram for the 250 but heres one for the QY6 maybe it will help
Attached Images
File Type: jpg fuelvacuumdiagram.jpg (51.1 KB, 17 views)
Reply With Quote
  #3  
Old 03-23-2015, 06:45 PM
liduno liduno is offline
Heavy Contributor
 

Join Date: Aug 2014
Posts: 702
Default

My cf250 had a coolant line that went to the carb but it really was worthless. You can eliminate it. It's supposed to warm the carb up but it only flows through such a small port it really is useless.

There was a vent towards the top of the carb and IIRC one vacuum line from the intake manifold. Sorry I don't have pics because I sold my 250.
Reply With Quote
  #4  
Old 03-23-2015, 07:51 PM
rookiebuggy rookiebuggy is offline
Lurker
 

Join Date: Feb 2015
Posts: 10
Default

Thanks guys! Will put it use tomorrow.
Reply With Quote
  #5  
Old 08-04-2015, 11:28 PM
bocanegramusic bocanegramusic is offline
Lurker
 

Join Date: Jul 2015
Location: high desert Ca.
Posts: 24
Default

Wasn't sure if there was any help in the solenoid, but you can test it by connecting battery positive and negative to it and see if it energized.
Let me know if everything worked out
Reply With Quote
  #6  
Old 08-05-2015, 06:07 AM
scjeep4.7HO scjeep4.7HO is offline
Contributor
 

Join Date: Apr 2015
Location: Virginia
Posts: 197
Default

You can hook the battery to the positive and negative on the solenoid and check continuity on the other 2 legs of the solenoid. If it's bad it will be closed with no batter voltage applied or if there is batter power and no continuity on the other 2 legs.
Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:32 AM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.