|
|
|
#1
08-05-2011, 07:54 AM
|
|||
|
|||
Hey ya'll!
My name is Josh. I picked up a Yerf-Dog 3206 last fall for my son. It had bent spindles from hitting a tree and had not been started in quite a while. Got it for $200, took it home and with a little work got it running. I then proceeded to straighten out the stock spindles.
We ran it like that for a while then I picked up some tires & wheels from a 2000 Honda TRX300 2wd for free. The rears are 25x12-9 Carlisle Turf Busters and the fronts are 23x8-11 Mud Hooks. The rears went right on and I ordered some spindles for the fronts which I redrilled for the correct bolt pattern. I have lots of plans for this thing but my next step is changing out the sprocket for a 45T to get some gearing back. I would rather have low end grunt than high speed since we plan on using it for trail riding in the woods where I take my Jeep. Also on the list are the heim joint A-arm mod and new beefier spindles that I'll make myself along with 5 point harnesses and eventually front brakes. 
|
|
#3
08-05-2011, 01:35 PM
|
||||
|
||||
|
Welcome
|
|
#4
08-05-2011, 02:27 PM
|
|||
|
|||
|
This was the day we brought it home.
|
|
#5
08-05-2011, 03:13 PM
|
|||
|
|||
|
After I got it running and the spindles fixed. Looks kinda funny with those huge tires on back and tiny ones on front. LOL
|
|
#6
08-05-2011, 03:14 PM
|
|||
|
|||
|
With the new fronts on
|
 |
|
|
