Need help installing reverse cable on 150gt

[td24t]

Hello, im new to this forum, and i need some help. i bought a gt 150 used, and the reverse braket and cable was removed. i replaced the braket and have a new cable, but i can figure out how it goes on. any help would be appreciated.

[uthe54]

Perhaps these will help? I'm not fimiliar with the GT 150, but I have a Razor 150. This is how mine go (I took these pictures when trying to locate the correct reverse cable for mine. Look at the cable labeled "my old cable")

Let me know if these help. My experience is limited to just two karts, but both of their reverse cables are different, so it's quite possible this is also different from your setup.

Perhaps, you could post a few pictures of your kart and what you have and that might help us out.

If these DO help you out, I can post more pictures of my setup.

[BuggyMaster]

uthe54, great info!

[GX150]

Your old cable looks like a match to the Tomberlin Punisher. I think Buggy Depot uses the same cable for their Yerf and Crossfire conversions.

[td24t]

Thanks that helps a lot.

[bam41]

wow! thats some great pic taking! Great Idea.

[uthe54]

Thanks guys! I made thoes pictures for a different purpose, but I guess they work here too!

When I get my cables sorted out and installed correctly, I'll take some good pictures, annotate them well, and post them so they make a better resource. I know it can get frustrating when you have a box of bolts, washers, nuts, springs, etc and have no idea where they go. I was in the same boat! Glad I can help.

Just so you know though, I go slow when I work on the buggy, so it might be a couple weeks before I get around to posting them, but I'll let you know when I do.