|
150cc GY6 and Under Engine Tech GY6 and Smaller Technical Discussion Forum |
|
Thread Tools |
#1
|
|||
|
|||
Crossfire150 Need carb/ fuel setup pictures
Just picked up crossfrie 150. Missing air box. Got it to start and run briefly with carb cleaner. Not sure if it has fuel pump or its missing. Some of the hoses are bad shape and or missing. I know carb and fuel tank need cleaned but wanna make sure I get hoses routed where they all need to go.
|
#2
|
||||
|
||||
There's no fuel pump, it's gravity fed. The fuel tank sits above the engine with a fuel line connecting to the carb.
__________________
2010 Carter Interceptor GTR 300 2010 Hammerhead 250 SS 2015 Kandi 49FM5 110cc 2015 Hammerhead GTS 250-SOLD 2008 Kazuma Coyote 150-SOLD |
#3
|
|||
|
|||
That's what I figured but wasn't sure.
|
#4
|
||||
|
||||
It's a pretty simple setup. You have a line from the fuel tank to the carb, vacuum line from the intake manifold to the carb, throttle cable, float bowl drain hose, and a connector for the fuel enricher/choke.
I don't have any pics to show you for the Crossfire, but a buddy has the 150R version and it was a 26mm CV carb stock. Set up is the same as most other GY6 150cc buggies, except they usually have 24mm CV carbs.
__________________
2010 Carter Interceptor GTR 300 2010 Hammerhead 250 SS 2015 Kandi 49FM5 110cc 2015 Hammerhead GTS 250-SOLD 2008 Kazuma Coyote 150-SOLD |
#5
|
|||
|
|||
K thanks. Did order new carb and clamp on air filter instead of air box. Don't want to stick too much time or money into it til I get it running and make sure motor is good.
|
|
|