Bu-ghonda Build

[robertnoble]

Hi, I no you have seen this buggy that I built last winter. After trial and error, the horizontal shaft was a disappointing engine build for what I wanted to achieve. So, here is what I am doing. I am rebuilding the back half of my mini buggy, and mounting a cb 750 that has only 11,000 miles on it. I am running the five speed tranny with it. The motor will be mounted to the buggy and nothing will be on the swing are expect what should be on there. I just started re-engineering it this weekend and this is what I have done so far. All the engine mounts, and most of the back part of the buggy minus some bracing. I am going to step up the rear sprocket from the 41 that came on the bike to a 56 tooth. Don't really need 100 mph plus buggy but wanted the lower end for the sand dunes here in michigan. I am installing an 8 inch disc brake kit for the front and continue using the mcp disc brake on the rear. Console will have an aluminum shifter for sequential shifting. Here are the updated pics so far. Thanks for looking.. Robert