|
|
|
#1
09-16-2010, 01:26 PM
|
||||
|
||||
Hello from Ohio,Help
Bought a buggy with a gy6 that supposedly needed a coil and that was it,,,,,,, so after new coil,regulator,cdi box and engine wiring harness it will now fire but wont do more than idle soon as i hit the throttle easy or hard it dies, still has spark ,I believe it is fuel related although i've cleaned the carb 3 times,flushed the fuel tank am getting fuel to the carb any help would be great
Last edited by ctrental; 09-16-2010 at 01:32 PM. 
|
|
#2
09-17-2010, 03:15 AM
|
||||
|
||||
I have had this problem on several buggies. I don't mess with cleaning stock gy6 carbs I toss 'em and buy a new cheapy off the bay, works like a champ every time. Welcome aboard.
__________________
09 Joyner Sand Viper 250 08 Joyner Sand Viper 250 2009 Joylaris 400 Screamer http://www.youtube.com/watch?v=eeulR4W1_PU
|
|
#3
09-17-2010, 09:11 AM
|
||||
|
||||
|
I adjusted the valves last night and was able to get it running....not right but running...if I feather the gas it will start at high idler (runs great from high idle to full throttle) and able to run it wide open, it's a lot peppier than I thought it would be, but when i come to a stop the clutch is still pulling so when I turn the idle down it bogs out and dies ?
|
 |
|
|
