|
Mini Buggy General Discussion General Discussion forum for Mini Buggies. (American Sportworks, HammerHead, Carter, etc) |
|
Thread Tools |
#1
|
||||
|
||||
Help with wheel hubs!!!
Need wheel hubs for the front of my spiderbox, and when I measured the diameter of the existing "front axle" (bolt the wheel was hooked up to) I thought I measured 1/2 in, but obviously that isn't right because there are NO wheel hubs for 1/2 in....anyone done this on their yerf can tell me what size?
thanks edit: I have seen Andrew1320 use what looks like these http://www.*************/4-x-4-Wheel-...ng_p_1653.html on his front end??
__________________
Yerf-Dog Spiderbox Reverse Gearbox Heavy Duty Ball Joints Heavy Duty Chain Tensioner Canvas Roof/Netting Key Start LED Brake Lights Headlights SOLD! Last edited by TheFauxFox; 11-03-2013 at 09:26 AM. |
#2
|
|||
|
|||
Should be a 5/8ths stud. Just keep in mind, those are 4 on 4 hubs, your rear hubs/rims are 4 on 110 mm. So using those means that you have different rims front to rear. May not be a big deal since most likely the tires will not be the same, but I went with a 4 on 110 mm hub on our Spiderbox just keep things the same. Now, using the 4 on 4 means you can fit a wider selection of rim, like golf cart rims for example, however, you may not find the same rim to fit the rear for the 4 on 110 mm.
|
#3
|
||||
|
||||
I'm using 4x4 on the front, and I'll just leave the rear tires the same. I might find the same size rear tires, but just knobby. I'll just change the style of the rear, and switch the front altogether.
__________________
Yerf-Dog Spiderbox Reverse Gearbox Heavy Duty Ball Joints Heavy Duty Chain Tensioner Canvas Roof/Netting Key Start LED Brake Lights Headlights SOLD! |
|
|