|
150cc GY6 and Under Engine Tech GY6 and Smaller Technical Discussion Forum |
|
Thread Tools |
#1
|
|||
|
|||
need help fuel problems
Ok let start by saying hello and am new to the hole buggy thing.
alright i bought a used 150cc buggy, before i got to test drive it was running then died on test drive but bought it any way. got it home had spark and 121 psi of compression no fuel (bad fuel pump) so when with the hole gravity thing after cleaning the carb 3 times. Heres the problem it starts then dies give it gas with the fuel valve close and runs open valve floods out carb. am using 1/4 clear tubing. and when just sitting there fuel is coming out the air filter side of carb.what gives |
#2
|
||||
|
||||
your float in the carb bowl is stuck open
|
#3
|
||||
|
||||
I agree check the float adjustment and make sure there is no trash in the needle & seat.
|
#4
|
||||
|
||||
welcome to the group
they are right float adj or stuck needle & seat
__________________
olderthan 2008 tomberline punisher 1500 spring 12g sliders 30mm cv pumper carb uni filter no rev cdi polaris xlt snowmobile shocks for front w/550 magnum springs & blaster fronts on rear and another buggy built working on mods gk-13 white spring 17 gram sliders so far |
|
|