|
|
|
|||||||
| 250cc and Above Engine Tech Technical Discussion Forum for 250cc and up Engines |
|
|
Thread Tools |
|
#1
10-27-2010, 01:57 AM
|
||||
|
||||
Joyner 250cc part called poker
Anyone know if you can get a part made/fab? I have a buddy that bought a Joyner 250cc dirt devil. He need's a part for the gear box called a poker dn250.08.106 is the part #. when he put's it in reverse it start's to move then spin's. look's like the previous owner's must of snapped it as it was welded and they didn't put it in the right spot so when you engage the reverse it doesn't push the gear all the way over. I don't know if he can adapt a different gear box or not. below is the picture he sent me.
|
|
#2
10-27-2010, 02:35 PM
|
||||
|
||||
|
From what I recall those gear boxes are obsolete.
__________________
09 Joyner Sand Viper 250 08 Joyner Sand Viper 250 2009 Joylaris 400 Screamer http://www.youtube.com/watch?v=eeulR4W1_PU |
|
#6
03-06-2011, 07:17 PM
|
||||
|
||||
|
I Finally Got all of the Part's out of the gearbox. here is the part's i think he need's to replace. Don't know if there is a machine Shop that can make em or not. maybe since joyner might be coming back maybe they will make/stock them again i don't know. I thought it was the poker but since looking at the other part's i think it might be these. there is a spot were one of the teeth or whatever it's called is missing and the other is warn down some. Was told that these might of been pressed and made out of powder metal
Last edited by SFORCES; 03-06-2011 at 07:27 PM. |
|
#7
03-16-2011, 12:44 PM
|
||||
|
||||
|
man those look a lot like the gears out of a lower unit on a outboard engine i would take them to a outboard repair shop and see if they can match some gears to them. P.S. dont tell them it is for a buggy gear box. just tell them its for a old outboard motor your grandpa had or something along that line
|
|
#8
03-17-2011, 09:01 PM
|
||||
|
||||
|
Quote:
|
|
#9
03-19-2011, 03:05 PM
|
||||
|
||||
|
Joyner will not be restocking those parts. As Glade and others said once before that unit is obsolete and discontinued. To be honest having those parts custom made will be much more than Cpt. Howdy's buggy is worth. I would suggest him looking for a buggy with a blown motor and utilizing the motor in it if his funds are limited. Sorry for the brutal truth but this topic has been sugar coated on 2 forums for quite awhile now. There is a reason that buggy and that design was discontinued and obsoleted and the pieces you hold in your hand are why.
__________________
09 Joyner Sand Viper 250 08 Joyner Sand Viper 250 2009 Joylaris 400 Screamer http://www.youtube.com/watch?v=eeulR4W1_PU |
|
#10
03-20-2011, 09:00 PM
|
||||
|
||||
|
Quote:
|
|
#22
06-15-2015, 12:47 PM
|
||||
|
||||
|
A CN250 reverse assembly with matching final transmission output shaft could be used on that engine, but you would most likely have to relocate the sprocket on the axle to line up with the new drive sprocket. Once the conversion was done, parts would be common if they broke or wore out.
|
|
#23
06-15-2015, 09:59 PM
|
||||
|
||||
|
Quote:
|
|
#24
06-15-2015, 10:00 PM
|
||||
|
||||
|
Quote:
|
|
|
