BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum

Go Back   BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum > Site News and Suggestions > New Member Introduction

New Member Introduction New to the forum? Say hello here!

Reply
 
Thread Tools
  #1  
Old 03-01-2010, 12:53 PM
bcplayer76's Avatar
bcplayer76 bcplayer76 is offline
Lite Contributor
 

Join Date: Mar 2010
Location: Las Vegas
Posts: 36
Default New to the Dirt...

Hey anyone please help, I just purchased a used 2007 Roketa gk-o1 150cc buggy at least that's what I believe it is, it was running the day I looked at it to buy, When I got it home it would not start...I replaced the cdi with a performance one along with the coil because I had no spark, change the plug also...Now I have to hold the gas peddle about 3/4 down to get it started and about 3 seconds in it will die on me, I cleaned the jets, carb, and gas tank.also replace the choke on carb or plunger what ever you call it and same thing.Checked the valves the gap on them now is .0019mm on both approx...the spark plug I gapped at 0.6mm seems small to me but that's what it called for.Also checked the stator spark and really couldn't tell how good spark was, need to wait until night I guess...Can anyone help me please on what may be the issue here I am new to all this...Thanks
__________________
Roketa GK-01 150cc
ENGINE INFO :
Engine type : CVT,4-stroke
Bore*stroke : 2.3*2.3 inches
Tires,front/rear : 19*7-8/22*11-10
Reply With Quote
  #2  
Old 03-01-2010, 02:36 PM
olderthan's Avatar
olderthan olderthan is offline
Heavy Contributor
 

Join Date: Jan 2010
Location: dayton nev--lake tahoe,nv
Posts: 588
Default

melcome to the group
sounds to me like your "choke" is not working correctly
olderthan
__________________
olderthan
2008 tomberline punisher
1500 spring 12g sliders
30mm cv pumper carb
uni filter no rev cdi
polaris xlt snowmobile shocks for front
w/550 magnum springs & blaster fronts on rear
and another buggy built working on mods gk-13
white spring 17 gram sliders so far
Reply With Quote
  #3  
Old 03-01-2010, 02:39 PM
24evanwilson's Avatar
24evanwilson 24evanwilson is offline
Senior Member
 

Join Date: Jul 2009
Location: Indiana Mostimes, NC sometimes
Posts: 1,253
Default

hey im evan whats up lol it does sound like you have a choke problem
__________________
MY HELIX
-20' maxxis tires
-1 1/2in.UNI air filter
-gutted exaust
-extended lugs
-headlights
-reflectors
-my stickers
-adjusted suspension
-ground out hubs
(to fit on the tires)



helix 150
Reply With Quote
  #4  
Old 03-01-2010, 02:50 PM
bcplayer76's Avatar
bcplayer76 bcplayer76 is offline
Lite Contributor
 

Join Date: Mar 2010
Location: Las Vegas
Posts: 36
Default

whats up...yeah not sure,I just replaced the choke to so now I'm going to check my intake gasket and the magneto stator tonight...Glad I found this place..
__________________
Roketa GK-01 150cc
ENGINE INFO :
Engine type : CVT,4-stroke
Bore*stroke : 2.3*2.3 inches
Tires,front/rear : 19*7-8/22*11-10
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:55 PM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.