BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum

Go Back   BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum > Technical Discussions > 150cc GY6 and Under Engine Tech

150cc GY6 and Under Engine Tech GY6 and Smaller Technical Discussion Forum

 
 
Thread Tools
  #1  
Old 04-23-2016, 09:48 PM
RedBarron989's Avatar
RedBarron989 RedBarron989 is offline
Lurker
 

Join Date: Feb 2014
Location: Hanover, Indiana
Posts: 18
Default 150cc sidewinder sputters when given gas but the runs fine.

150cc gy6 sidewinder buggy, bought if off a gentleman a week ago and got it running. With the carb that came with it, but to start it I had to start it with starting fluid and then could drive it with just smoke and that was all. Well I replaced the carb and the choke and now I can start it without starting fluid and it will idle fine now but when I give it a little gas it wants to die but when I gun it she will go. Note it doesn't have an airfilter, and the vacuum lines are not there. There is a line from the valve cover that pushes air out but idk where it goes. Also while driving it it will backfire just a single pop every know and then. Any ideas.

Last edited by RedBarron989; 04-23-2016 at 09:52 PM.
  #2  
Old 04-24-2016, 11:31 AM
SYCARMS's Avatar
SYCARMS SYCARMS is offline
Supporting Vendor
 

Join Date: Sep 2009
Location: Senatobia, Mississippi
Posts: 3,375
Default

How is your spark, what color is it? How is the compression and have you checked valve adjustment?
  #3  
Old 04-24-2016, 02:02 PM
RedBarron989's Avatar
RedBarron989 RedBarron989 is offline
Lurker
 

Join Date: Feb 2014
Location: Hanover, Indiana
Posts: 18
Default

Spark is good, smoke is just white but doesn't do it now with new carb. Compression seems fine, I took the top end off and rings are still good and cylinder. But no I haven't checked my valves.
  #4  
Old 05-03-2016, 08:39 PM
jmansracerocket's Avatar
jmansracerocket jmansracerocket is offline
Senior Member
 

Join Date: Apr 2012
Location: ny, long island
Posts: 1,342
Default

main jet could be clogged or dirty? or to big of a jetting ?
__________________
Hammer head Single seater know as herbie
under construction

Aluminum fuel tank, aluminum wheels, custom fuel/cargo rack, entire rewire, trail tech vapor, ported big valve head, a12camshaft, 12 gram sliders, straight intake, kirkey wide seat, front end extension. 4 point harness, welded cage. Hammerhead exhaust.



Blade Single Seater Restore
welded cage, engine build, new wiring harness/electric box, spun aluminum fuel tank.
  #5  
Old 05-03-2016, 09:36 PM
RedBarron989's Avatar
RedBarron989 RedBarron989 is offline
Lurker
 

Join Date: Feb 2014
Location: Hanover, Indiana
Posts: 18
Default

Well I cleaned the carb just 28th carb cleaner but that's it. I haven't changed the jet so I'm not for sure on the size.
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:45 PM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.