BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum

Go Back   BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum > Technical Discussions > 150cc GY6 and Under Engine Tech

150cc GY6 and Under Engine Tech GY6 and Smaller Technical Discussion Forum

Reply
 
Thread Tools
  #1  
Old 12-22-2016, 05:59 PM
lance_gsr lance_gsr is offline
Lurker
 

Join Date: Dec 2016
Posts: 1
Default Which vacuum lines do I need? what goes where?

so I recently purchased and installed a performance carburetor that I don't think uses a vacuum to operate, where my stock did. I also purchased and installed a performance uni filter and exhaust and after removing the stock air box and attached hoses, I'm not sure which need to be attached to the intake manifold (which has one vent on it) where do I start and how do I know which ones I need and which ones I can remove completely. I have a lance gsr gy6 150 if it makes a difference
Reply With Quote
  #2  
Old 12-22-2016, 09:11 PM
xlint89's Avatar
xlint89 xlint89 is offline
Senior Member
 

Join Date: Dec 2011
Location: cleveland OH
Posts: 1,064
Default

Welcome to the site.

We need pics of your set up in order to help you out.

Otherwise, let me try and help you...

That one there, can stay.

The one over here, has to go to the flux capacitor. Otherwise your warp drive will never engage.
__________________
My Yerban assault vehicle: 2.2mm stroker crank, 62mm Nikasil cyl, Taida large vavle head, American made valve springs, ported intake manifold, TM 28mm carb, stock CDI, Bando coil, TK exhaust, stock CVT except for the 14g sliders, 13/40 internal gears, 16T drive, 31T axle sprocket, 22" rear tires, and ONE BIG POTATO CANNON mounted on top..........
Reply With Quote
  #3  
Old 12-29-2016, 10:21 PM
BuggyMaster's Avatar
BuggyMaster BuggyMaster is offline
Administrator
 

Join Date: Jul 2009
Posts: 2,311
Default

The one from the intake feeds the fuel petcock and the CVT bleeder.
Reply With Quote
  #4  
Old 12-31-2016, 09:57 PM
SYCARMS's Avatar
SYCARMS SYCARMS is offline
Supporting Vendor
 

Join Date: Sep 2009
Location: Senatobia, Mississippi
Posts: 3,375
Default

Not sure what your setup is or type of carb you have . If you have the vacuum fuel pump(2 hoses go to it under fuel tank) one vacuum hose will go to it the other vacuum will go to the air bleed diaphragm on right side of carb if so equipped.
Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:58 AM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.