|
150cc GY6 and Under Engine Tech GY6 and Smaller Technical Discussion Forum |
|
Thread Tools |
#1
|
|||
|
|||
What size jet
What size jet after new intake and uni filter and gutted exhaust? I also am wondering which roller and spring for the carter 150 is a good upgrade. I ride mostly trails and the occasional jump.
|
#2
|
|||
|
|||
I live at sea level
|
#3
|
||||
|
||||
i would try between 130 &135 jet --1500 spring and 10 gram rollers or 12gram sliders
__________________
olderthan 2008 tomberline punisher 1500 spring 12g sliders 30mm cv pumper carb uni filter no rev cdi polaris xlt snowmobile shocks for front w/550 magnum springs & blaster fronts on rear and another buggy built working on mods gk-13 white spring 17 gram sliders so far |
#4
|
|||
|
|||
Thank You!
|
#5
|
|||
|
|||
after rejetting do I need to adjust the air fuel mixture screw?
|
#6
|
||||
|
||||
You might but not always. Depends if you actually had to rejet the pilot jet as well (which in most cases you will not).
|
#7
|
||||
|
||||
I would rejet using a 125 jet, yellow 1500 torque spring with 12 gram rollers.
Tom |
|
|