BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum

Go Back   BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum > Technical Discussions > 150cc GY6 and Under Engine Tech

150cc GY6 and Under Engine Tech GY6 and Smaller Technical Discussion Forum

 
 
Thread Tools
  #1  
Old 10-27-2011, 06:26 AM
Pitbullcrazyinky Pitbullcrazyinky is offline
Lurker
 

Join Date: Oct 2011
Posts: 8
Default Carbide 150cc issue.

I just bought a used one. This thing starts right up, runs and sounds good but will only do about 13mph.

What should I look into?
  #2  
Old 10-27-2011, 07:04 AM
metalstudman1's Avatar
metalstudman1 metalstudman1 is offline
Super Moderator
 

Join Date: Aug 2009
Location: Belmont,NC (elevation 534')
Posts: 2,668
Default

Welcome- When you say it runs good -do you mean it throttles all the way up smoothly? If that's correct-look over the buggy for brakes dragging, wheel/axle bearing drag. If these check out I'd pull the CVT cover off and look at the belt,clutch and variator for signs of damage-if these items look normal I'd then pull the variator off to see if the rollers/sliders are wore out.
Posting some pic's might help us determine a cause too.
  #3  
Old 10-27-2011, 02:03 PM
SYCARMS's Avatar
SYCARMS SYCARMS is offline
Supporting Vendor
 

Join Date: Sep 2009
Location: Senatobia, Mississippi
Posts: 3,375
Default

American Sport Works offered 2 different CDI's. If you go into the electrical box and look at the cdi there should still be numbers usually a tag. One CDI offered was a restricted one which will limit the speed to 15 to 20 mph for younger kids. You can also contact the previous owner and ask him if this was ordered with the restricted cdi. I would check this first before checking all on Metalstudmans previous post. If you do find the tag on the CDI ppost the numbers and I may be able to tell you which CDI you have.

TOM
  #4  
Old 10-27-2011, 06:17 PM
Pitbullcrazyinky Pitbullcrazyinky is offline
Lurker
 

Join Date: Oct 2011
Posts: 8
Default

Thanks for the quick responses.
I looked in the electrical box and didn't see any numbers. "just a quick peek"
I did notice 2 "vacuum lines" not connected. I will be checking them out this weekend.

What are these slider upgrades I see a few of you guys talking about?
  #5  
Old 10-28-2011, 01:47 AM
SYCARMS's Avatar
SYCARMS SYCARMS is offline
Supporting Vendor
 

Join Date: Sep 2009
Location: Senatobia, Mississippi
Posts: 3,375
Default

Some will swear to slidders and others rollers. I suggest rollers in a stock variator. The lighter the roller or slidder more RPM is needed to up shift the cvt. When tunning the cvt with lighter rollers it is suggested you also replace the clutch torque spring.

TOM
  #6  
Old 10-28-2011, 04:48 PM
Pitbullcrazyinky Pitbullcrazyinky is offline
Lurker
 

Join Date: Oct 2011
Posts: 8
Default

Vacuum line. Where do they go.




It's not the same size as the pvc valve thing.

Last edited by Pitbullcrazyinky; 10-28-2011 at 04:58 PM.
  #7  
Old 10-28-2011, 04:52 PM
Pitbullcrazyinky Pitbullcrazyinky is offline
Lurker
 

Join Date: Oct 2011
Posts: 8
Default



  #8  
Old 10-30-2011, 01:11 PM
Pitbullcrazyinky Pitbullcrazyinky is offline
Lurker
 

Join Date: Oct 2011
Posts: 8
Default

I believe the vacuum lines went to the original air flow system.

Here is a pic of the cdi



Also I took the carb apart and the jets looked clean.
  #9  
Old 10-30-2011, 01:14 PM
Pitbullcrazyinky Pitbullcrazyinky is offline
Lurker
 

Join Date: Oct 2011
Posts: 8
Default

Quote:
Originally Posted by SYCARMS View Post
American Sport Works offered 2 different CDI's. If you go into the electrical box and look at the cdi there should still be numbers usually a tag. One CDI offered was a restricted one which will limit the speed to 15 to 20 mph for younger kids. You can also contact the previous owner and ask him if this was ordered with the restricted cdi. I would check this first before checking all on Metalstudmans previous post. If you do find the tag on the CDI ppost the numbers and I may be able to tell you which CDI you have.

TOM
The previous owner told me it would do 28mph in grass.
Also it has a uni filter on it.
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:18 PM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.