Sons first buggy new harness help

[Tikotiko]

So i picked up a gk01 roketa from a buddy of mine. Got a new short gy6 from amazon and it ran great around the block a couple of times. We get it out to the desert and it wont run. Figured out i need a new harness just to clear myself of any electrical issues. I contacted some dude and ordered a new harness but when I asked about shipping info he didnt like it. I ended up getting the harness so everything is good. Problem is theres no instructions so im wingin it. I can take pics and hopefully i can get this thing going again for my 7 year old son. Please help

[SYCARMS]

If the harness if for a GK01 it should be plug and play. If not you will need a wiring schematic which will help but wire colors will be different.

[Tikotiko]

I ordered a gk01 harness now is that whay i really got who knows? I dont know if all gy6 motors are the same. I dont know what wires go to the resistor or the voltage regulator im not seeing that yet

[SYCARMS]

Although the GY6 are basically the same manufacturers will wire differently. If the harness is for the GK01 it should just plug and play.

[Tikotiko]

Originally Posted by SYCARMS

Although the GY6 are basically the same manufacturers will wire differently. If the harness is for the GK01 it should just plug and play.

I have a few prongs left and i dont have a prong that matches either of the voltage regulaters i have. I have to bypass the kill switch cause i dont care too much for it. Also eliminate thr turn signals and horn. Sometime this week ill take some pics amd post them . I want to keep the harness as stock as possible

[Tikotiko]

Testing pics here

[Tikotiko]

Here are the left over plugs i got. Im missing the 2 that go to the resistor and the voltage regulator. Id like to buy parts that will match the harness so i dont start hacking up a new harness.

[Tikotiko]

[Tikotiko]

[SYCARMS]

The pics really don't help much. All GY6 resistors I have run into for the GY6 150 has either a red or green wire but only one wire. Also if what I see as the cdi it has one plug going to it. The 150 has 2 plugs to it, a 2 pin and 4 pin.