|
|
|
#1
06-06-2011, 05:21 PM
|
|||
|
|||
no spark on hh 250
i ve been getting help from gx 150 on the electrical tech forum thanks for your help! still no spark, it was running it backfired then wouldnt restart. i changed the plug the cdi and the coil. tested the ignition and for continuity from the stator any ideas?? thanks in advance
__________________
challenger II 503 rotax grizzly 660 cr 250 hammerhead 250 
|
|
#2
06-07-2011, 06:07 AM
|
||||
|
||||
|
as far as the cdi & coil, did you replace them with OEM stock units or aftermarket "will-fit" parts? not all CDI's are created equal. i have found this out the hard way.
__________________
07 HH250SS UNI HIT CLUTCH DR. PULLEY VARIATOR RED MAIN 17g ROLLERS 12T/45T SPROCKETS IRIDIUM PLUG HP CDI & COIL LED LIGHTS ASW CARBIDE UNI 12g SLIDERS RED MAIN 39T SPROCKET (coming soon)
|
|
#4
06-07-2011, 02:31 PM
|
||||
|
||||
|
if you replaced all that stuff then it sounds like you may have wiring issues.....or maybe check the stator/voltage reg.????
__________________
07 HH250SS UNI HIT CLUTCH DR. PULLEY VARIATOR RED MAIN 17g ROLLERS 12T/45T SPROCKETS IRIDIUM PLUG HP CDI & COIL LED LIGHTS ASW CARBIDE UNI 12g SLIDERS RED MAIN 39T SPROCKET (coming soon)
|
 |
|
|
